JDM Angler Supply is now open — authentic JDM tackle, shipped worldwide.

País/Región / Idioma

  • Worldwide Shipping

  • Extensive Product Selection

  • Authentic JDM Tackle

  • Expert Tackle Support

APIA Rod Model Names Explained

Decode APIA rod names by series, reel configuration, length, power, tip code, section count, and generation.

Official APIA Foojin'RS rod lineup showing model names and codes printed on the blanks.

APIA rod names often combine a product family, an individual model name, and a specification code. GRANDAGE LEGACY SWEEPER S61UL-SS, for example, identifies a spinning model with a nominal length of 6'1", an Ultra Light power designation, and a soft-solid tip. Its numerical lure and line ratings are supplied separately in the specifications.

The pattern changes between families and generations. Some earlier spinning models omit an initial S, some rods have no individual nickname, and section counts are not always written as a numerical suffix.

This guide explains the documented patterns through examples from Foojin’RS, Foojin’Z, GRANDAGE LEGACY, GRANDAGE ATLAS, and older Brute’HR and GRANDAGE STD. models. Historical examples are identified separately so that their specifications are not confused with newer versions.

Featured image source: Image: APIA

Quick reference

Code element Usually indicates Important limitation
S, C, or B Spinning or baitcasting configuration in the documented family Letter use changes between families and generations
61, 93, 103, 911 Nominal length in feet and inches The code is not a decimal measurement
UL, L, ML, M, MH, H, HH Power designation Always check the model-specific lure and line ratings
SS, HS, T Soft-solid, hard-solid, or tubular tip in GRANDAGE LEGACY Tip type does not define every application
-5 Five sections in documented GRANDAGE STD. examples Other multi-piece rods may omit a section-count suffix
[BORON] Boron-fiber material specification It is not a numerical power or recovery rating

Separate the Product Name from the Specification Code

A useful starting point is:

Series → Individual model name, where present → Reel configuration → Length → Power → Additional designation

This is a reading aid, not a fixed structure that every APIA rod must follow.

Example: GRANDAGE LEGACY SWEEPER S61UL-SS

Component Meaning in this model
GRANDAGE LEGACY Product family
SWEEPER Individual model name
S Spinning configuration
61 6 feet 1 inch
UL Ultra Light power
SS Soft-solid tip

APIA explicitly defines SS as Soft Solid, not Short Solid. The suffix identifies the tip category; it does not specify the length of the solid section.

[[JDMAS:apia-grandage-legacy-sweeper]]

Names such as SWEEPER, HIGH ROLLER, and VIVOGUE identify individual models. Treat them as names rather than specifications that can be translated into a fixed lure range or construction.

Not every model has such a name. The discontinued GRANDAGE STD.83ML-5, for instance, is identified by its family and specification code without an additional nickname.

Reading Reel Type, Length, and Power

S, C, and B: Reel Configuration

APIA uses different reel-type identifiers across its product families.

S appears before the length in spinning models such as GRANDAGE LEGACY S61UL-SS. C identifies baitcasting models in examples such as Foojin’RS ARLEQUIN C79MH. Older Brute’HR rods use B in baitcasting names such as BOTTOM CONTACT B88H.

Earlier Foojin’RS spinning models include names such as SPRINGER 88ML without an S. APIA’s corresponding lineup identifies them as spinning rods. Read the omission in that series context rather than turning “no letter” into a universal manufacturer-wide rule.

Length Codes Combine Feet and Inches

The numerical length code is not a decimal measurement. 93 means 9 feet 3 inches, while 99 means 9 feet 9 inches.

Three-digit codes require attention to the split. 103 means 10'3", but 911 means 9'11". The latter appears in GRANDAGE BRUTE THE UNEXPLORER S911MH, which APIA lists at 9'11".

Code Feet and inches Approximate metric conversion
56 5'6" 1.68 m
61 6'1" 1.85 m
77 7'7" 2.31 m
88 8'8" 2.64 m
93 9'3" 2.82 m
99 9'9" 2.97 m
911 9'11" 3.02 m
100 10'0" 3.05 m
103 10'3" 3.12 m
105 10'5" 3.18 m
106 10'6" 3.20 m
108 10'8" 3.25 m
109 10'9" 3.28 m

These metric figures are rounded conversions. When reproducing a particular rod’s specifications, retain APIA’s published overall length.

The length identifies a dimension, not an exclusive fishing technique. It does not establish the rod’s casting range, target species, or suitability for a particular location without the rest of the product information.

Power Is Separate from Lure Weight

The examples in this guide include UL, L, ML, M, MH, H, and HH power designations. These should be read alongside the individual lure rating, not substituted for it.

For example, the ML in BRILLIANT S68MLT belongs to its power designation. Its published lure range is 1–10 g. The earlier Foojin’RS SPRINGER 88ML also carries ML, but its published range is 3–32 g. The same letters do not establish a universal weight range across different rod families.

For comparisons, keep power, action, lure rating, line rating, and tip construction in separate fields.

What “+” Means in Documented Examples

A plus sign forms part of the power designation, as in ML+ or L+.

For the 2026 VIVOGUE S96ML+, APIA describes a design based on the handling of a 9'6" ML rod, with additional power in the butt section. This provides a documented explanation of the model’s development.

The development account for NIGHTBIRD S90L+ similarly describes butt power raised slightly above the L class, together with a setup intended to handle lighter lures.

These examples support discussing increased butt power where APIA specifies it. They do not establish that every plus model retains an unchanged tip or follows an exact numerical relationship with the next power class.

Keep MHX Intact Unless Its Meaning Is Documented

The older Brute’HR DD EXTEND 95MHX is a long-distance rockfish model. APIA’s description emphasizes loading the blank with the rig’s weight and using its bend for casting. It distinguishes this approach from the more specialized Brute’TP 92H.

For this model, preserve MHX as the published designation. Do not assign X an additional universal meaning—such as a quantified increase in stiffness—without a model-specific explanation.

Tip Codes: SS, HS, and T

GRANDAGE LEGACY provides the clearest examples of APIA’s tip identifiers.

Identifier Documented tip category Example
SS Soft solid SWEEPER S61UL-SS
HS Hard solid HYPER STINGER S56L-HS
T Tubular BRILLIANT S68MLT

APIA describes SS as emphasizing a yielding response to bites, while HS emphasizes firmness and response. These are design priorities, not guarantees of a particular hook-up result.

Official APIA GRANDAGE LEGACY lineup with model names and tip codes visible on the rod blanks.

The official GRANDAGE LEGACY lineup shows individual names and codes such as S66L-HS, S68MLT, and S72L-SS on the blanks. Source: Image: APIA

Separate the Power Letters from T

The tubular models do not all place a hyphen before the tip identifier:

S68MLT → S / 68 / ML / T S77MT → S / 77 / M / T S78MHT → S / 78 / MH / T

Thus, MLT is ML power plus a tubular-tip identifier. MT and MHT are not additional tip categories alongside T. APIA’s specification table lists these models as tubular.

A Tip Category Does Not Define Every Application

The hard-solid STAY GOLD S66L-HS is described as handling jighead rigs, small plugs, and small metal jigs. Its development explanation also discusses following bites when fishing plugs. HS should therefore not be interpreted as excluding plug fishing or prioritizing only an immediate, forceful hookset.

[[JDMAS:apia-grandage-legacy-stay-gold]]

Likewise, the soft-solid RIDDLER S72L-SS covers jighead rigs and small plugs. The complete blank, length, and intended presentation remain part of the explanation.

GRANDAGE LEGACY Examples

The following models demonstrate how the tip letters relate to the actual specifications. All are spinning models; the table is a selection of naming examples rather than a ranking.

Model name Code Length Lure rating Tip
HYPER STINGER S56L-HS 5'6" 0.2–6 g Hard solid
SUPER STINGER S60L-HS 6'0" 0.2–8 g Hard solid
SWEEPER S61UL-SS 6'1" 0.2–4 g Soft solid
STAY GOLD S66L-HS 6'6" 0.3–10 g Hard solid
BRILLIANT S68MLT 6'8" 1–10 g Tubular
RIDDLER S72L-SS 7'2" 0.3–10 g Soft solid
UNIVERSAL S77MT 7'7" 2–12 g Tubular
STRIKE GOLD S78MHT 7'8" 2–18 g Tubular
SUPER BLAST S83M-HS 8'3" 2–15 g Hard solid
RUTHLESS S86MHT 8'6" 2–18 g Tubular

The established models are documented in APIA’s specification table; SUPER STINGER and STRIKE GOLD are also detailed on the LEGACY product page.

Read each lure rating individually. Sharing SS or HS does not give two rods the same operating range.

Section Counts and Special Material Labels

“-5” Identifies Five Sections in GRANDAGE STD.

The discontinued GRANDAGE STD.83ML-5 is a five-section model with a published packed length of 59.5 cm. The related 90M-5 also has five sections, with a packed length of 64.2 cm.

This is a useful suffix pattern, but it is not the only way APIA identifies portable rods.

The 2026 Foojin’RS NIGHTBIRD EXV S90L+ is listed as a five-section model, while Foojin’Z HIGH ROLLER EXⅣ S103ML is a four-section model. Their section counts are confirmed in the specifications rather than by a final “-5” or “-4.”

For transport planning, record both the section count and packed length. Do not calculate storage length simply by dividing overall length by the number of sections.

“[BORON]” Identifies a Material Specification

The fifth-generation Foojin’Z BEAST BRAWL 93MH [BORON] is documented as combining carbon prepregs with boron fibers. The bracketed label distinguishes that material configuration.

Describe it as boron-fiber construction or reinforcement, rather than using the label to infer a numerical recovery speed, lifting capacity, or hook-setting result. Its lure and line ratings remain separate specifications.

Seabass Models: Why the Generation Matters

A familiar model name can survive a redesign while its code, lure range, weight, or joint changes. The following tables keep the earlier and newer specifications separate.

Earlier Foojin’RS: Historical Naming Examples

These figures are from APIA’s official introduction to the earlier Foojin’RS generation. They should not be substituted for the 2026 specifications.

Earlier model Reel type Length Lure rating PE rating Joint
SPRINGER 88ML Spinning 8'8" 3–32 g #0.6–1.5 Spigot
LYNX 93M Spinning 9'3" 6–42 g #0.8–2.0 Spigot
DESIRE 95MH Spinning 9'5" 12–50 g #1.0–2.5 Spigot
VIVOGUE 96ML+ Spinning 9'6" 6–38 g #0.8–2.0 Spigot
SKY HIGH 99M Spinning 9'9" 8–42 g #0.8–2.0 Spigot
BELUGA 105MH Spinning 10'5" 14–50 g #1.2–2.5 Put-in
ARLEQUIN C79MH Baitcasting 7'9" 15–65 g #1.5–4.0 Put-in
BARBARIAN C90MH+ Baitcasting 9'0" 20–70 g #2.0–5.0 Put-in

These examples also show that NANO JOINT is not synonymous with one physical joint arrangement: APIA identified both spigot and put-in versions using that technology.

Selected 2026 Foojin’RS Models

The newer specifications introduce an explicit S on the spinning models below. The published joint arrangement for these selected models is put-in.

2026 model Length Lure rating PE rating
SPRINGER S88ML 8'8" 5–32 g #0.6–1.5
LYNX S93M 9'3" 6–38 g #0.8–2.0
DESIRE S95MH 9'5" 12–50 g #1.0–2.5
VIVOGUE S96ML+ 9'6" 6–36 g #0.8–2.0
BARBARIAN C98MH+ 9'8" 20–80 g #2.0–5.0

The change is more than typography. SPRINGER’s lower lure limit differs, VIVOGUE’s upper limit differs, and BARBARIAN changes length as well as its rating. When comparing a listing with a specification table, match the entire identifier and generation.

Foojin’Z: Fifth- and Sixth-Generation Examples

APIA maintains the fifth-generation Foojin’Z page in its discontinued-product archive. The following three models are historical examples from that generation.

Fifth-generation model Length Lure rating PE rating Joint
NATURAL SEVEN 77MH 7'7" 10–45 g MAX #2.0 Spigot
BEAST BRAWL 93MH [BORON] 9'3" 10–56 g MAX #2.5 Put-in
HIGH ROLLER 103ML 10'3" 7–45 g MAX #2.0 Spigot

For comparison, the sixth-generation SUPER SEVEN S77MH is listed at 7'7", with an 8–42 g lure range and PE #0.8–2.0. It is a separately specified model, not simply NATURAL SEVEN with an S added.

The HIGH ROLLER comparison is equally instructive. The fifth-generation 103ML is listed at 170 g, while the sixth-generation S103ML is listed at 154 g and has a 7–42 g lure range. The persistent model name does not make the specifications interchangeable.

Official sixth-generation APIA Foojin'Z lineup arranged with model codes visible on the blanks.

The sixth-generation Foojin'Z is a distinct lineup; familiar model names do not make its specifications interchangeable with earlier generations. Source: Image: APIA

[[JDMAS:apia-foojin-z-high-roller]]

Keep Technology Claims with the Correct Generation

APIA identifies X-FORCE100 as a technology introduced with Foojin’Z’s sixth generation. Its explanation describes crossed carbon fibers formed within a single prepreg and the removal of glass scrim from that construction. This technology should not be used to explain the listed weight of an earlier-generation rod.

The 2026 Foojin’RS range also adopts X-FORCE100. However, its material note specifies M46X only for DESIRE S95MH and CRESTER C93M. A series-level reference to advanced materials does not mean every model contains the same combination.

Rockfish and Rockshore Examples

Brute’HR: Earlier Rockfish Models

The Brute’HR models below appear in APIA’s discontinued-product archive. They remain useful examples of the older naming system, including its use of B for a baitcasting model.

Model Reel type Length Lure rating
HARBOR SWEEPER 77ML Spinning 7'7" 3.5–14 g
BOTTOM CONTACT B88H Baitcasting 8'8" 12–48 g
DD EXTEND 95MHX Spinning 9'5" 14–45 g

The power and length identifiers help distinguish these models, but the application details come from their development descriptions. In particular, DD EXTEND’s long-distance role should not be converted into an unsupported definition of X or described as the same tournament-focused design as Brute’TP 92H.

GRANDAGE ATLAS: Preserve Plug and Jig Limits

ATLAS illustrates why every qualification in a specification matters.

Official APIA GRANDAGE ATLAS lineup showing the series name and model markings on the blanks.

GRANDAGE ATLAS model names must be checked against each model's separate plug and jig limits. Source: Image: APIA

Model Length Lure specification
BLACKFIN 109H 10'9" 13–60 g, with plugs limited to MAX 50 g
BLUE RUNNER 100HH 10'0" Plug MAX 100 g / Jig MAX 120 g

These are APIA’s model-specific figures. The plug limits should not be replaced by the broader number or by the jig allowance.

[[JDMAS:apia-grandage-atlas-blue-runner-100hh]]

BLACKFIN 109H is described around rocky-shore fishing for blackfin seabass and related applications. BLUE RUNNER 100HH combines shore-based jigging and plugging applications. Those descriptions establish their intended roles; the H and HH labels alone do not provide the complete operating limits.

Turning the Code into a Useful Tackle Comparison

Identify the Exact Product Before Comparing Performance

Keep the series, generation, individual name, and full code together. A shortened entry such as “VIVOGUE 96” omits information needed to distinguish versions.

Next, separate what the identifier communicates from what the specification table supplies. Length and power may be visible in the name, while materials, action, joint type, guide configuration, packed length, and numerical ratings require their own entries.

This also prevents a technology mentioned in a series introduction from being assigned automatically to every model.

Keep Component Weight and Complete-Rig Weight Separate

A jighead or sinker’s stated weight is not the same measurement as the assembled rig’s weight. When documenting a setup, identify whether a number refers to the head, sinker, lure body, or complete rig.

Do not turn a particular rig example into a new rod rating. Where the product information does not resolve how a setup should be assessed, confirm the intended use with the manufacturer rather than reconstructing a limit from the power letters.

Do Not Treat the Midpoint as a Manufacturer-Defined Optimum

The arithmetic midpoint of a published range is not, by itself, a documented recommendation.

For example, NIGHTBIRD S90L+ is rated 3–28 g, while APIA’s development account specifically discusses comfortable handling of lures below 10 g. Its described light-lure role is more informative than calculating a midpoint of 15.5 g.

Use the manufacturer’s stated presentations alongside the ratings. Do not assume that a rod with the wider or higher range is automatically better for a particular lure.

[[JDMAS:apia-rods-collection]]

Conclusion: Read the Name in Context

APIA’s model identifiers become easier to navigate when each element is kept in its proper role: the series identifies the family, the individual name identifies the model, and the code often supplies reel configuration, nominal length, power, and a tip or construction designation.

The remaining details come from the specifications for the correct generation. SS means Soft Solid; 93 means 9'3"; and a familiar model name does not guarantee unchanged specifications.

For a reliable comparison, keep the complete identifier, retain every qualification attached to the published ratings, and use the development description to understand the intended application. That produces a clearer picture than asking the model code to explain the entire rod.

Specifications and naming examples checked against APIA’s official product information on November 16, 2026. Historical and discontinued models are identified in the text. PE values retain the manufacturer’s Japanese line-size notation.

Key official references