JDM Angler Supply is now open — authentic JDM tackle, shipped worldwide.

País/Región / Idioma

  • Worldwide Shipping

  • Extensive Product Selection

  • Authentic JDM Tackle

  • Expert Tackle Support

YAMAGA Blanks Rod Model Numbers Explained

Decode length, power, reel type, PE class, application modes, sections, and generation labels across YAMAGA Blanks rod families.

YAMAGA Blanks rod model number guide featuring an actual Calista 90LML/S rod.

A YAMAGA Blanks rod name can identify its nominal length, power class, reel type, or intended fishing style. The combination depends on the series. The S in Galahad 633S identifies a spinning model, while the S in Calista 90LML / S stands for Stream. Reading the series name first gives the remaining letters and numbers their context.

YAMAGA Blanks manufactures its rods in its own Japanese factory, handling blank design, rolling, painting, assembly, and shipment. Its product descriptions explain how individual models are intended to cast, work a lure, and respond during a fight. Model names provide a useful introduction to those designs; the specification sheet supplies the measurements and ratings needed to compare them.

YAMAGA Blanks craftspeople assembling fishing rods inside the company's Japanese factory.

YAMAGA Blanks designs and builds its rods in its own factory in Kumamoto, Japan. Source: Image: YAMAGA Blanks

Start with the series and model generation

Different YAMAGA Blanks families use different combinations of numbers and letters. Even the position of a reel-type identifier can change.

Model How to read the relevant elements
Galahad 633S 63 indicates a nominal 6 ft 3 in length; 3 corresponds to the model’s maximum PE rating; S identifies spinning.
SeaWalk Light Jigging B66ML B identifies baitcasting, followed by the nominal length 66 and the ML power class.
Calista 90LML / S 90 indicates a nominal 9 ft length; LML describes its combination of tip and butt power; S means Stream.
Lupus 511RF 511 indicates a nominal 5 ft 11 in length; RF means Retrieve / Finesse.

These examples illustrate why the series is essential to interpreting the code.

The model generation also matters. When YAMAGA Blanks renewed the Galahad series for 2019, the final power digit changed from an ounce-class designation to an indication of the upper PE line rating. Older models and separate subseries need to be checked against their own specifications.

Reading the length numbers

The length portion of many model names follows the familiar feet-and-inches convention. For example, 86 reads as 8 ft 6 in, 511 as 5 ft 11 in, and 81 as 8 ft 1 in.

First identify which digits belong to length. In Galahad 633S, the length portion is 63; the following 3 has a separate meaning. A three-digit group therefore does not automatically represent length alone.

Nominal length and listed overall length

The model name indicates a nominal length. Use the manufacturer’s listed overall length when an exact measurement matters.

Model Nominal length indicated by the name Exact conversion of that nominal length Listed overall length
Lupus 511RF 5 ft 11 in 1,803.4 mm 1,820 mm
Calista 86M / PF 8 ft 6 in 2,590.8 mm 2,573 mm
BlueSniper 81/10 TRQ-Mode 8 ft 1 in 2,463.8 mm 2,485 mm

The differences above come from comparing a mathematical conversion of the model name with the official product specifications. A product comparison should retain the listed overall length.

Understanding power letters and PE numbers

Lettered power classes

Names such as SeaWalk Light Jigging 64ML and Calista 86M / PF include a lettered power class. Familiar examples include Light (L), Medium Light (ML), Medium (M), Medium Heavy (MH), and Heavy (H).

These classifications should be interpreted within the relevant series and fishing application. YAMAGA Blanks explains, for example, that the SeaWalk Light Jigging models differ in the response suited to particular jig weights and fishing conditions, while retaining substantial butt power. The lure and line ratings give the practical context for each class.

Some names combine two power classes. In Calista 90LML / S, YAMAGA Blanks describes an L-class tip with an ML-class butt. The 79MMH / AG combines an M-class tip with an MH-class butt. These combinations describe the intended distribution of power along the rod.

Numerical classes and PE ratings

For some models, a number corresponds directly to the listed maximum PE rating. That relationship must be checked within the correct series and generation.

Model Listed line rating
Galahad 633S MAX PE3
BlueSniper 81/10 TRQ-Mode MAX PE10
Galahad 624B電動 (electric jigging model) Up to PE5
Previous-generation BlueSniper 79/3 PE2–4

The first two examples match their maximum PE ratings. The electric Galahad and the previous-generation BlueSniper demonstrate why the final number cannot be treated as a universal PE limit.

Drag capacity is a separate specification. For example, the BlueSniper 81/10 TRQ-Mode lists MAX PE10 and a DragMax of 17 kg at 45 degrees. The model’s 10 does not state its drag limit.

Identifying the reel type

YAMAGA Blanks uses S for spinning and B or Bait for baitcasting in various model families. Their placement varies: Galahad 633S ends with the reel-type identifier, while SeaWalk Light Jigging B66ML begins its specification code with it. The spinning SeaWalk Light Jigging 64ML has no S in its short model name.

[[JDMAS:yamaga-seawalk-b66ml]]

Read application codes as complete groups. In the area-trout model Lupus 62MB, MB means Motion / Bottom Bouncing. Its final letter is part of that fishing-style description.

Electric jigging models

The 電動 designation (dendo, meaning electric) identifies models developed for jigging with an electric reel. YAMAGA Blanks also lists the Galahad 586B電動 and 624B電動 as suitable for manually operated reels.

Their detailed specifications differ, including their guide setups. The designation identifies the intended application; the individual product page gives the hardware and compatibility details.

Reading section counts and joint information

An explicit 3pcs or 4pcs identifies the number of rod sections. The EARLY for Mobile lineup includes both:

Model Section count
EARLY 84ML / 4pcs 4
EARLY 96MMH / 4pcs 4
EARLY 76MMH / 3pcs 3

The native-trout Lupus 51S / 3pcs is another example of an explicit section-count label.

A model can have multiple sections without stating the count in its name. The SeaWalk Light Jigging 64ML, for example, is listed as 2pcs with a grip joint.

For transport and storage, compare the listed closed length and joint type as well as the section count. “Two sections” alone does not tell you where the rod separates.

Calista application codes

Calista uses application labels to distinguish different approaches to eging, or squid fishing with prawn-shaped egi lures. The following examples show how those labels relate to the individual models.

Code Meaning Example Intended emphasis
TJ Technical Jerk 76ML / TJ Precise control of varied jerking actions
AR All Rounder 82ML / AR Versatility across seasons and fishing situations
AG Aggressive 79MMH / AG Quick, responsive egi manipulation
PF Power & Finesse 86M / PF Power combined with fine control
S Stream 90LML / S Using current and controlling line slack

These are application concepts associated with specific models.

The 76ML / TJ is designed for precise egi actions at different distances, including changes in tempo. Its use extends beyond a single slack-jerking technique. The 82ML / AR provides the all-round option in these examples, with a listed egi range of sizes 2.5–3.5.

For 90LML / S, Stream refers to working with tidal flow during eging. Its description emphasizes drift presentations, controlled falls, and line management. Read S together with the Calista series name to understand this application.

Official YAMAGA Blanks Calista 90LML/S image labeled S for Stream.

Calista 90LML/S combines a light-class tip, medium-light butt, and Stream application label. Source: Image: YAMAGA Blanks

[[JDMAS:yamaga-calista-90lml-s]]

BlueSniper boat casting modes and shore labels

Boat casting modes

The BlueSniper Boat-Casting series renewed for 2025 groups its models into three design types.

Label Official term Design emphasis
FLX-Mode FLEX A flexible tip and belly for naturally working lures with relatively little resistance
RGD-Mode RIGID Response suited to working poppers, minnows, and jigs
TRQ-Mode Torqueful Power and sustained loading during fights with large fish

These labels describe the design selected for each model. They help distinguish its intended handling and fishing application within the boat-casting series.

For example, BlueSniper 81/10 TRQ-Mode combines a nominal length code, a number matching its MAX PE10 rating, and the Torqueful application label. Its listed lure range is 40–150 g.

Official YAMAGA Blanks BlueSniper 81/10 TRQ-Mode rod image showing its grip-joint layout.

BlueSniper 81/10 TRQ-Mode combines nominal length, maximum PE class, and Torqueful mode. Source: Image: YAMAGA Blanks

[[JDMAS:yamaga-bluesniper-81-10-trq]]

Plug labels on shore models

Shore models use their own labels. The older BlueSniper 106H Plug Special appears in official material with the abbreviation PS. The later BlueSniper PL106H uses PL, which YAMAGA Blanks identifies as Plug.

Keep the full name and generation when comparing these rods. The older Plug Special also has a listed jig rating, so its name describes its emphasis without limiting it to diving pencils alone.

Lupus area trout application codes

Lupus for Area Trout—rods for Japanese managed fisheries stocked with trout—uses Retrieve and Motion categories for the models below. Retrieve models emphasize presentations driven mainly by reeling, while Motion models emphasize actions such as bottom work or minnow twitching.

Model Application code Main use described by YAMAGA Blanks
511RF Retrieve / Finesse Micro spoons and small crankbaits
61RM Retrieve / Multipurpose A range of spoon and crankbait presentations
66RS Retrieve / Sharpness Crankbait fishing with responsive hooksets under lure resistance
62MB Motion / Bottom Bouncing Bottom presentations with metal vibration lures
60MTR Motion / Twitch & Retrieve Minnow presentations

The RF in 511RF belongs to this Retrieve / Finesse classification. It should be read in that context rather than interpreted as a generic “regular-fast” action rating. Likewise, the M in MB and MTR identifies the Motion category. These definitions apply to the area-trout models listed here.

Official YAMAGA Blanks Lupus for Area Trout lineup showing Retrieve and Motion model codes.

Lupus area-trout codes separate Retrieve models from Motion models and their specialized presentations. Source: Image: YAMAGA Blanks

[[JDMAS:yamaga-lupus-area-511rf]]

BlueCurrent application names and technology labels

BlueCurrent combines application names, technology designations, and generation identifiers. Each serves a different purpose.

Application names

Name Meaning in the product lineup Example
JH-Special Jighead-Special 67 TZ/NANO JH-Special
Plug An emphasis on small hard lures 610Plug Quickness, 73Plug Seamless
All-Range A broad range of light-game applications 85 TZ/NANO All-Range
Stream Plug fishing in current III 76 Stream

The 610Plug and 73Plug models are developed primarily for small hard lures, with jighead use as a secondary application. All-Range models broaden the applications, while retaining their own lure and line limits.

The III 76 Stream is designed around plug fishing in current, including working topwater lures and minnows and retrieving sinking pencils. Its listed specifications should guide lure selection for that role.

For older listings, note that YAMAGA Blanks marks the 62, 67, and 71 TZ/NANO JH-Special models as discontinued in 2025. They remain useful examples of the naming pattern.

TZ/NANO and III

Within BlueCurrent TZ/NANO, the designation refers to Torzite-ring guides and carbon material incorporating Nanoalloy technology. The individual model specification provides the detailed guide arrangement.

III is a generation identifier. YAMAGA Blanks describes BlueCurrent III as the third generation in its official 2021 English catalog. The numeral identifies that product generation; the accompanying model descriptions explain its design and performance characteristics.

Using the model name to compare rods

A useful comparison starts with the complete series and model name, including any application label or generation designation. Read the nominal length next, then interpret power and reel-type indicators within that series.

Use the product specification to complete the comparison:

  • Listed overall length for the manufacturer’s stated measurement.
  • Section count, joint type, and closed length for transport and storage.
  • Lure or jig rating for the intended tackle range.
  • Line rating for the specified PE or other line class.
  • DragMax and its stated angle, where provided, for the stated loading condition.
  • Application description for the way the rod is designed to work a lure.

For example, the 81/10 TRQ-Mode name introduces the BlueSniper’s length class, PE class, and design emphasis. Its product sheet then supplies the 2,485 mm overall length, two-section grip-joint construction, 40–150 g lure range, and 17 kg DragMax at 45 degrees. Together, the name and specifications provide the information needed for a meaningful comparison.

[[JDMAS:yamaga-blanks-rods-collection]]

Key official references