On this page
Routes C69MH and Monstruo “G” 710HC both identify casting rods, but they put the reel-type letter in different places. TULALA also publishes a separate Code for each of these models: RTC69MH and RMG710HC, respectively. Understanding both forms helps you match a product listing to the rod you intend to buy.
This guide explains the naming patterns through Monstruo, L-TEX, Harmonix, and Routes examples. The aim is to read the useful information in the name—length, power, reel type, and series—then connect it with the manufacturer’s casting-weight and transport specifications.
Featured image source: Image: TULALA
Model Name and Code: Two Ways to Identify the Same Rod
TULALA’s product tables distinguish Model, the product name, from Code, its alphanumeric identifier. The code may add a series prefix or express the length differently from the name.
| Official model name | Official Code |
|---|---|
| Monstruo “G” 710HC | RMG710HC |
| Monstruo “W.Record” 81HC | RMW81HC |
| Kanade 76H | LTXK-706HC |
| Bring out 70M | LTXF-700MC-GC |
| Routes C69MH | RTC69MH |
The Monstruo entries use RMG and RMW, the two L-TEX examples use LTXK and LTXF, and Routes C69MH uses RTC. These are the identifiers printed in the respective official specification tables.
Keep the complete name and code together when comparing listings. A descriptive product name and its shorter code are not necessarily different editions, and an individual letter does not always have a separate, published English definition.

Monstruo G 710HC pairs the model name with the separate official code RMG710HC. Source: Image: TULALA
[[JDMAS:tulala-monstruo-g-710hc]]
Length: Read Feet and Inches, Then Recognize the Series Pattern
For many TULALA models, the length portion joins feet and inches. 69 means 6'9", 75 means 7'5", and 710 means 7'10" in the corresponding Routes, Corona, and Monstruo examples.
Longer shore rods follow the same feet-and-inches principle: Staccato101LMS-HX is 10'1", and Corona120MHTC-HX is 12'0". The digits are not a decimal measurement.
L-TEX Uses Zero-Padded Length Codes
L-TEX provides a different way of writing the same length information:
| Model name | Length portion of its Code | Length |
|---|---|---|
| Kanade 76H | 706 in LTXK-706HC | 7'6" |
| Bring out 70M | 700 in LTXF-700MC-GC | 7'0" |
Here, 706 represents 7 feet 6 inches, while 700 represents 7 feet 0 inches. Both readings are confirmed by the manufacturer’s Length field. The extra zero belongs to the code’s length format, not to a section-count designation.
For an imported rod, retain the manufacturer’s exact spelling when searching. Searching only for a shortened number can miss the code used in a retailer’s listing.
Reel Type and Power: Separate C or S from the Power Letters
Routes Places the Reel Type Before the Length
Routes / C / 69 / MH identifies a casting rod, 6'9", with Medium Heavy power. Its specification table gives a 10–56 g casting-weight range.
Routes / S / 56 / UL identifies a spinning rod, 5'6", with Ultra Light power. TULALA lists a casting-weight limit of 7 g and describes applications including small freshwater lures and light saltwater fishing.
The C or S identifies reel type. MH or UL identifies the power class. The weight range is an additional specification of the individual rod.
[[JDMAS:tulala-routes-c69mh]]
Monstruo Can Put the Reel Type After the Power
Monstruo “W.Record” 81HC reads as 81 / H / C: 8'1", Heavy, casting. The manufacturer describes it as a heavy-power rod for big-bait cranking.
Similarly, Monstruo “ConceptDestruction” 68ULS separates into 68 / UL / S: 6'8", Ultra Light, spinning. Its casting range is 1.8–7 g. ULS is UL power followed by S for spinning, rather than an additional power class.
[[JDMAS:tulala-w-record-81hc]]
Power and Action Are Different Specifications
TULALA lists Action separately. Both Monstruo models below have an RF, or Regular Fast, action, but their stated casting ranges differ:
| Model | Power / reel type | Action | Casting range |
|---|---|---|---|
| Monstruo “G” 710HC | Heavy / casting | RF | 3/8–6 oz |
| Monstruo “W.Record” 81HC | Heavy / casting | RF | 1/2–4.5 oz |
The 81HC’s description emphasizes big-bait cranking and a comparatively accommodating tip. Matching H labels therefore does not establish an identical blank or casting range. Compare the complete specification and the presentation each model was developed for.
Series Names: What Monstruo “G,” W.Record, and L-TEX Tell You
Monstruo “G” and W.Record
TULALA explicitly explains the G in Monstruo “G” as “Great.” The series is developed around large-bass fishing, with the 710HC emphasizing longer-distance presentations.
W.Record means World Record in the series name. The 81HC model is a moving-bait design, particularly for retrieving large baits in the 4 oz class. This is a series concept and model application—not a separate measurement of rod strength.
L-TEX: Designs Built Around Particular Techniques
TULALA describes L-TEX through a local-technique concept. Kanade 76H was developed around swim-jig fishing, with a 14–56 g casting range. The 76 in its name and 706 in its Code identify the same 7'6" length.
Bring out 70M takes a different direction: crankbaits. Its full model name is Bring out 70M WooDream × TULALA by RomanMade, and its Code is LTXF-700MC-GC. TULALA describes a composite design combining a glass tip with a carbon butt, rated for 7–28 g.
That construction comes from the product description. Keep -GC as part of the exact code rather than using it to infer a detachable grip or a particular section count.

Kanade 76H uses the official code LTXK-706HC, where the zero-padded 706 still represents 7 feet 6 inches. Source: Image: TULALA
[[JDMAS:tulala-ltex-kanade-76h]]
[[JDMAS:tulala-ltex-bring-out-70m]]
Harmonix and -HX: Read the Complete Model Name
TULALA’s Harmonix concept draws its name from musical harmonics. The manufacturer describes a Japan-made series intended to combine the bending and torque characteristics of traditional materials with the responsiveness and sensitivity of newer materials.
The Corona and Staccato models below carry the -HX suffix. Their full designations identify different applications within that family; the shared suffix does not make them interchangeable.
| Full model designation | Reel type | Length | Casting range | Manufacturer-described focus |
|---|---|---|---|---|
| Corona75MLTC-HX | Casting | 7'5" | 4–28 g | Large trout in medium and main rivers |
| Corona120MHTC-HX | Casting | 12'0" | 15–45 g | Taman-focused rock-shore baitcasting |
| Staccato101LMS-HX | Spinning | 10'1" | 2–23 g | Large mebaru from rocky shores |
| Staccato102MHYS-HX | Spinning | 10'2" | 10–70 g | Light shore jigging and shore-plug presentations |
The Corona lengths, casting ranges, and applications are stated on their individual product pages.
The two Staccato models illustrate why the full description matters. 101LMS-HX was developed for large mebaru, with particular attention to light plugs around rocky terrain. 102MHYS-HX addresses heavier jigs and plugs, with shore pelagics and flatfish among the intended targets.
Treat MLTC-HX, MHTC-HX, LMS-HX, and MHYS-HX as complete model identifiers when matching a listing. The manufacturer’s application notes provide the reliable explanation of the target fishing, without assigning an assumed fish name to every letter.

Corona75MLTC-HX keeps the complete MLTC-HX sequence in its model designation. Source: Image: TULALA
Corona 120: Match the Version to Your Reel’s Handle Side
Corona120MHTC-HX is offered in right-hand-reel and left-hand-reel versions. The distinction is part of the product listing, so it belongs in the specification you confirm before ordering.
The rod uses Straw Setting HD-DIV. TULALA explains that the line moves beneath the blank after passing through the entrance guide; on the right-hand-reel version, the guide layout turns around the left side. This is a model-specific guide arrangement, not a general rule that all TULALA casting rods have separate right- and left-hand versions.
Section Count and Packed Length: Read the Construction Details
The Routes models provide a clear example of information that sits outside the name. Both S56UL and C69MH are four-piece rods, but their model numbers do not contain a separate 4 to indicate that construction.
| Model | Fishing length | Sections | Folded length |
|---|---|---|---|
| Routes S56UL | 5'6" | 4 | 47 cm |
| Routes C69MH | 6'9" | 4 | 55.5 cm |
The manufacturer publishes these transport dimensions separately from the fishing lengths. Use Folded Length when comparing a rod with your case or available storage space.

Routes C69MH is a four-piece rod even though its model name contains no section-count digit. Source: Image: TULALA
A contrasting example is Monstruo “ConceptDestruction” 68ULS: its fishing length is 6'8", but its folded length is 170.5 cm. A shorter fishing length does not automatically mean a shorter package.
The practical sequence is to identify the rod first, then confirm its joint arrangement, section count, and folded length. Do not substitute a power letter, a series label, or the final digit of a length code for that construction information.
Use the Specification Fields to Finish the Comparison
The model name tells you which product you are looking at. TULALA’s specification table then supplies the measurements and ratings needed to match it to your tackle.
| Specification field | What it adds |
|---|---|
| Length | The assembled rod length |
| Action | The stated bending-action classification |
| Cast Wt. | The model’s casting-weight range or limit |
| Mono Line / PE | Separate line specifications in the manufacturer’s units |
| Folded Length | The packed length of the rod |
| Rear Grip Length | A dimension for comparing handle layouts |
These fields appear on the official Monstruo, Harmonix, and Routes product pages. Keep the unit printed with each value: the Monstruo casting ranges above are stated in ounces, while the Routes examples use grams.
One useful detail from TULALA’s Q&A is that the monofilament-line specification refers to monofilament used as the main line. It is not automatically the leader limit for a braided-line setup. Any model-specific leader instruction should be read separately.
[[JDMAS:tulala-brand-collection]]
Put the Name and the Specifications Together
For a TULALA listing, start by matching the full model name and official Code. Read the length using that family’s format, separate the identifiable power and reel-type letters, and keep the remaining suffix intact.
Then compare the actual presentation: the lures you intend to cast, the model’s action and line specifications, and the length you need on the water. For transport, use the folded length specified by TULALA and the external dimensions of your protective case.
The name identifies the configuration; the individual specifications establish whether it fits your fishing. That is the useful distinction when moving between Monstruo, L-TEX, Harmonix, and Routes.
Key official references
- TULALA Routes C69MH and Routes S56UL
- TULALA Monstruo “G” 710HC and Monstruo “W.Record” 81HC
- TULALA L-TEX: Kanade 76H and Bring out 70M
- TULALA Harmonix: Corona75MLTC-HX, Corona120MHTC-HX, and Staccato models
- TULALA manufacturer Q&A

