JDM Angler Supply is now open — authentic JDM tackle, shipped worldwide.

País/Región / Idioma

  • Worldwide Shipping

  • Extensive Product Selection

  • Authentic JDM Tackle

  • Expert Tackle Support

ZENITH Rod Model Numbers Explained

Decode ZENITH series prefixes, reel type, length, sections, power, tip construction, and guide suffixes.

ZENITH CURRENT RUNNER shore angler casting at sunset.

ZENITH rod codes bring together several useful details: the rod family, reel type, nominal length, power class, and selected construction or component specifications. A code such as AIME-S832ML/Ti identifies an AIM eging spinning rod with an 8-foot-3-inch length designation, two sections, ML power, and titanium-frame guides.

The starting point is the series. ZENITH uses different numbering patterns across offshore jigging, casting, shore fishing, and squid rods. Once you identify the family, the remaining letters and numbers become much easier to read.

The Five Elements to Look For

These five elements provide a practical framework for reading the examples in this guide.

Element What it identifies Examples
Series code The product family ZMV, ZL, DP, CR, GCP
Reel-type code Spinning or baitcasting configuration S, B
Length and section information Nominal rod length, sometimes followed by section count 63, 952, 5102
Power or model class The strength category or a numerical variant within a series ML, M, H, /10
Additional specification A tip construction, guide version, or other variant ST, /Ti, /Hi, NANO

Read these elements within the relevant family. The specification row then supplies the actual lure range, line rating, construction details, and any published drag rating. The examples below show how the same framework applies to several distinct ZENITH naming patterns.

1. Identify the Series Code

The opening letters usually identify the family. Knowing the family also tells you which type of fishing the model was developed for.

Offshore jigging and casting

Code Series or variant Main application
ZMV ZEROSHIKI MACH V-Spec Offshore jigging
ZKLA ZEROSHIKI KINKAI Light Spec — All Round Light jigging
ZKLT ZEROSHIKI KINKAI Light Spec — Technical Jerk Light jigging
ZSL ZEROSHIKI Super Light Spec Super light jigging
ZL ZEROSHIKI Liberator Light to medium offshore jigging and underhand jig casting
DP Disparo Offshore lure casting
LTP Lunatic peak Offshore baitcasting for large pelagic species including GT and amberjack

The distinction between ZKLA and ZKLT is particularly useful. ZENITH specifies 24t carbon as the main material for All Round models and 40t carbon as the main material for Technical Jerk models. The Technical Jerk version also has a more tip-oriented action. These letters distinguish two designs within KINKAI Light Spec.

Shore, light-game, and squid rods

Code Series Main application
SRI STORM RIDER iRON MAN Rock-shore casting and jigging
CR CURRENT RUNNER Shore jigging and plug fishing
SCH Schelm Versatile shore and inshore lure fishing
SCHC Schelm Cross Light lure fishing from shore and boats, including four-piece models
LB Lubina Bestia Big-bait fishing with interchangeable length configurations
AIME AIM Eging Eging—squid fishing with prawn-shaped egi lures
AIMA AIM Ajing Ajing—Japanese light-game fishing for horse mackerel
AIMM AIM Mebaru Mebaru light game—lure fishing for Japanese rockfish
GC Grand Chariot Ika-metal squid fishing with weighted metal jigs, and omorig squid fishing with a leader and separate sinker
GCP Grand Chariot Polestar Ika-metal squid fishing with weighted metal jigs, and omorig squid fishing with a leader and separate sinker

TANAJIG collaboration models use their own formats

The collaboration ranges illustrate why the complete family name matters:

  • ZEROSHIKI MASTER SPEC TZ includes TZ63BL/St and TZ63BL/Hi.
  • ZEROSHIKI Mid Spec TZMII uses codes such as TZ-MID2-S62L/St. Here, TZMII belongs to the series name, while TZ-MID2 appears in the model number.
  • ZEROSHIKI SuperLightSpec TZ includes TZ-SL-S70UL-FC/St and the corresponding /Ti version.

2. Read S and B as the Reel-Type Codes

Where they appear as the reel-type designation:

  • S identifies a spinning model.
  • B identifies a baitcasting model.

For example, ZMV-S63M is the spinning model and ZMV-B63M is the baitcasting model. In TZ63BL/Hi, B appears after the length designation instead. Both formats identify the reel configuration; the position of the letter follows the family’s naming pattern.

Guide layouts and reel-seat models are separate product specifications. A B identifies a baitcasting rod, while the individual model description explains its particular guide arrangement.

[[JDMAS:zenith-zeroshiki-mach-v-spec-collection]]

3. Read Length and Section Count Together

ZENITH commonly expresses nominal length by joining feet and inches:

Length designation Nominal length
63 6 feet 3 inches
68 6 feet 8 inches
84 8 feet 4 inches
95 9 feet 5 inches
510 5 feet 10 inches
102 10 feet 2 inches

These readings appear in the ZMV, Liberator, Disparo, CURRENT RUNNER, Polestar, and STORM RIDER examples discussed below.

Length followed by section count

In families that include the number of sections after the length, split the numeric block accordingly:

Model Numeric block Reading
CR-S952ML 95 + 2 9 feet 5 inches, two sections
AIME-S832ML/Ti 83 + 2 8 feet 3 inches, two sections
GCP-B5102HST 510 + 2 5 feet 10 inches, two sections

Schelm Cross provides a useful comparison: SCHC-S752L has two sections, while SCHC-S754L has four. The final digit identifies the section count in these models.

[[JDMAS:zenith-current-runner-collection]]

Length without a section-count digit

Other families leave section count to the specification table. ZL-B68ML uses 68 for its nominal 6-foot-8-inch length, and its construction is a two-section grip joint. SRI-102HH uses the complete 102 for 10 feet 2 inches; the rod also has two sections, but the final 2 in the code is part of the length designation.

This distinction matters when comparing transport dimensions. A detachable-grip construction separates near the handle, so its packed length differs from a rod that separates farther up the blank. Read the construction description and closed length together.

4. Interpret Power Within the Series

Familiar power abbreviations appear throughout ZENITH’s ranges:

Code Common reading
UL Ultra Light
L Light
ML Medium Light
M Medium
MH Medium Heavy
H Heavy
XH Extra Heavy
XXH Extra Extra Heavy

Use power to compare models within the intended application, then match the published lure and line ratings to your tackle. A light-game rod and an offshore jigging rod are designed around different loads, even when they share a power abbreviation.

When a specification uses PE #1, PE #3, or a similar value, the number is the Japanese PE braided-line size designation—not a breaking-strength rating in pounds. Compare the manufacturer’s stated PE range with the line maker’s diameter and strength data.

STORM RIDER iRON MAN also uses HH and HD model designations. Retain those series-specific labels when identifying a rod and use its specification row for the actual lure and drag ratings.

Disparo and Lunatic peak use numerical classes

In DP-S84/10, DP identifies Disparo, S identifies spinning, and 84 gives the nominal 8-foot-4-inch length. The /10 distinguishes the model class. Its published ratings are lures up to 100g, PE up to #8, and maximum applicable drag of 10kg.

The drag figure should be read from the specification table. These examples show why it cannot be calculated directly from the slash number:

Model Lure rating Published drag rating
DP-S74/5 Up to 50g Maximum 3kg
DP-S84/5 Up to 50g Maximum 6kg
DP-S74/8 Up to 80g Maximum 6kg
DP-S84/10 Up to 100g Maximum 10kg

The two /5 models have the same lure-weight ceiling but different drag ratings.

Official ZENITH Disparo image showing an offshore casting rod and large pelagic fish.

Disparo uses slash-number model classes; the separate specification table supplies lure, line, and drag ratings. Source: Image: ZENITH

[[JDMAS:zenith-disparo-collection]]

Lunatic peak offers another example: LTP-B83/18 is rated for 80–180g lures, PE #6–8, and 15kg drag at 45°. The /18 identifies the variant; the published drag specification supplies its load rating and stated angle.

5. Recognize Tip and Component Specifications

ST identifies solid-tip models

In GCP-B5102HST, read the ending as H + ST: H power with a solid tip. The same pattern appears in GCP-B692XHST, which combines XH power with a solid tip. ZENITH separates these solid-tip ika-metal models from the FTS-equipped omorig models in the Polestar range.

Official ZENITH Grand Chariot Polestar GCP-B5102HST product image showing its solid-tip squid-rod configuration.

In GCP-B5102HST, H is the power class and ST identifies the solid tip. Source: Image: ZENITH

FTS identifies a particular tip construction

Lubina Bestia provides a direct comparison:

  • LB-B85/763HF has an FTS tip.
  • LB-B85/763H has a full-carbon tubular tip.

That construction difference is the useful distinction between these two codes. The MHF spinning model is also FTS-equipped.

ZENITH’s technical description for the FTS-equipped Ocean Striker TaiRubber models explains an outer layer of specially arranged glass fibers and an integrated construction joining different materials without a separate tip joint. FTS is therefore a construction feature to read alongside the model number and its stated action.

UFR is a separate technology name

UFR means Ultimate Flex Reinforcement. ZENITH lists UFR tips on additional Grand Chariot omorig models. The term appears in the product’s construction description and should be kept separate from the rod’s power designation.

Guide and specification suffixes

Marking Meaning in the named range
/Ti Titanium-guide version in AIM Eging Limited Edition and SuperLightSpec TZ. AIM specifies titanium frames with SiC rings.
/St Stainless-guide version in SuperLightSpec TZ. MASTER SPEC TZ presents its /St model as the Standard version.
/Hi The High Grade version of MASTER SPEC TZ.
NANO Schelm’s manufacturer-described 30t medium-modulus nano-carbon construction.
-Gray The gray EVA grip option on the relevant Grand Chariot models.

Guide-frame material and ring material are distinct specifications. For example, AIM Eging Limited Edition combines titanium frames with SiC rings.

The FC models have a separate casting limit

ZENITH describes the SuperLightSpec TZ FC models as 7-foot rods developed for casting during super light jigging. The manufacturer specifies a casting maximum of half the weight shown in the model’s weight column. For instance, a listed upper weight of 80g gives a casting maximum of 40g under that instruction. Keep this condition attached to any FC-model weight description.

6. Ten Model Numbers Decoded

The following examples bring the naming patterns together. Feet-and-inches figures describe the model’s nominal length; metric lengths below are ZENITH’s published specifications.

ZMV-S63M — ZEROSHIKI MACH V-Spec

ZMV / S / 63 / M identifies the series, spinning configuration, nominal 6-foot-3-inch length, and Medium power.

This example places length and power in the code while leaving section count and working limits to the specification table.

ZKLT-B64M — KINKAI Light Spec Technical Jerk

ZKLT / B / 64 / M identifies a Technical Jerk baitcasting model with a nominal 6-foot-4-inch length and Medium power.

The Technical Jerk family’s 40t-carbon main material and more tip-oriented action explain the design variant represented by ZKLT.

ZL-B68ML — ZEROSHIKI Liberator

ZL / B / 68 / ML identifies the Liberator baitcasting model with a nominal 6-foot-8-inch length and Medium Light power.

The code’s 68 describes length; the detachable-grip construction and working limits come from the product specification.

DP-S84/10 — Disparo

DP + S + 84 + /10 identifies the Disparo spinning model discussed above. Use its separate construction, lure, line, and drag specifications when choosing a casting setup.

CR-S952ML — CURRENT RUNNER

CR / S / 95 / 2 / ML identifies a CURRENT RUNNER spinning rod, nominally 9 feet 5 inches long, with two sections and Medium Light power.

The code identifies the model; the separate specification row supplies its jig, plug, line, and drag limits.

SRI-102HH — STORM RIDER iRON MAN

SRI / 102 / HH identifies the family, nominal 10-foot-2-inch length, and HH model class.

ZENITH presents it as a rock-shore plugging model. Its name omits a separate reel-type letter and section-count suffix, so those details must be checked in the specification row.

SCH-S-762M NANO — Schelm

SCH / S / 76 / 2 / M / NANO identifies a Schelm spinning rod, nominally 7 feet 6 inches long, with two sections, Medium power, and the series’ nano-carbon construction.

ZENITH describes this model for both inshore boat fishing and shore lure fishing; its exact dimensions and lure range remain separate specifications.

LB-S90/763MHF — Lubina Bestia

LB identifies Lubina Bestia and S identifies spinning. This model has two length configurations: nominally 9 feet and 7 feet 6 inches, with published lengths of 2.74m and 2.29m.

Its 3+1 construction consists of three assembled sections plus an alternative #2 section. Swapping that section changes the length. The MHF model has an FTS tip, a 14–110g lure rating, and a PE #3 upper limit.

Official ZENITH Lubina Bestia LB-S90/763MHF image showing its interchangeable rod sections and handle.

LB-S90/763MHF uses an alternative section to change between its two listed lengths. Source: Image: ZENITH

[[JDMAS:zenith-lubina-bestia-collection]]

GCP-B5102HST — Grand Chariot Polestar

GCP / B / 510 / 2 / H / ST identifies the series, baitcasting configuration, nominal 5-foot-10-inch length, two sections, H power, and solid tip. The maximum metal-sutte (weighted squid jig) rating is 25 gō. In this Japanese sinker-weight system, one gō is 3.75g, so 25 gō is approximately 94g.

Polestar combines titanium-frame SiC guides at the tip with stainless-frame SiC guides from the belly to the butt. Its baitcasting models use a spiral guide layout to reduce line wrapping around the tip.

AIME-S832ML/Ti — AIM Eging Limited Edition

AIME + S + 83 + 2 + ML + /Ti identifies the AIM eging spinning model, nominally 8 feet 3 inches long, with two sections, Medium Light power, and titanium-frame guides.

In this Limited Edition model, all guides use titanium frames with SiC rings; the exact dimensions and egi range remain separate specifications.

Putting the Code to Work

Start with the fishing application and series, then read the reel type and length. Where the family encodes section count, use it to narrow the construction you want. Finally, compare the complete model’s lure rating, line specification, and closed length.

For offshore rods, keep jigging and casting limits distinct. Where ZENITH supplies a drag rating with an angle, retain that condition when comparing specifications. A published applicable-drag figure is a usage specification, not a statement of the rod’s breaking load.

The most useful result of reading a ZENITH code is a clear identification of the model and its variant. Combine that identification with the matching specification row, and you can compare the actual lengths, joints, tip constructions, and tackle ratings that matter for your fishing.

[[JDMAS:zenith-collection]]

Key official references