JDM Angler Supply is now open — authentic JDM tackle, shipped worldwide.

Country/Region / Language

  • Worldwide Shipping

  • Extensive Product Selection

  • Authentic JDM Tackle

  • Expert Tackle Support

Megabass Lure Color Codes Explained: GG, GP, NC and More

Decode 28 Megabass finish codes, from ghost and metallic patterns to internal reflectors, matte paint, and specialty treatments.

Three Megabass lures showing GG, GP, and NC color finishes.

Megabass color names often begin with labels such as GG, GP, HT, NC, or M. These are not model numbers. They usually identify how the lure is finished—how its body transmits light, where a reflector is placed, how the surface flashes, or which painting treatment was used.

For example, GP PRO BLUE separates into GP, the Guanium Phantom finish, and PRO BLUE, the individual color pattern. Reading those two parts separately makes long Megabass color names much easier to compare.

This guide explains 28 codes and finish names documented by Megabass. Some are current across many lure families; others are older, limited, or tied to a particular model. Always confirm the exact color list on the lure's product page.

How to Read a Megabass Color Name

A complete Megabass color name may contain more than one layer of information:

Part Example What it tells you
Finish code GP The base optical or surface treatment—in this case, Guanium Phantom.
Pattern name PRO BLUE The individual paint scheme, baitfish reference, or color combination.
Additional code IL in GP IL PHANTOM A second treatment can be combined with the base finish; IL adds an angle-dependent color shift.

A code describes the finish, not the lure's action, depth, buoyancy, or size. Those remain separate product specifications. The same finish code can also look different when applied to different body shapes and paint patterns.

Quick Reference by Finish Type

Finish type Codes and names Main visual characteristic
Transparent and ghost GG, GP, GS, MG, SF, SS, HT Varying combinations of translucency and reflected flash.
Metallic, foil, and holographic M, WAGIN, WAKIN, SH, LZ, GC, DD, ST Opaque or patterned reflection from the surface or foil treatment.
Internal reflector AB, NC A reflective insert is placed inside a clear body.
Paint and surface treatment FA, FF, GLX, HIDE, IL, MAT, PM Paint layers, texture, flakes, color shift, or reduced gloss alter the appearance.
Glow treatment GLOW A luminous glow treatment that stands out under low-light conditions.
Special or legacy names HAKUSEI, PG, SG Model-specific, earlier-generation, or specialized treatments documented by Megabass.

Finish Codes AB–GG

AB — Abalone

AB identifies a natural abalone plate inside a clear lure body. The shell creates irregular iridescent reflection, and its natural pattern varies from one insert to another. Unlike SH or SS, AB specifically refers to an internal abalone component.

DD — Diamond Dust

DD uses separate dot-like scale markings that create many small points of sparkle. Instead of one continuous mirror flash, the body produces a broken field of individual highlights.

FA — Fine Art Finish

FA identifies Megabass's detailed Fine Art painting treatment. Controlled gradation, transparency, and painted detail are applied to the lure's molded shape to reproduce a fish pattern. FA identifies the painting method; the rest of the color name identifies the particular pattern.

FF — Fur Finish

FF identifies a raised, fuzzy surface treatment. Megabass uses it to suggest insect or small-animal bodies. The texture also suppresses surface gloss and softens the lure's visual profile.

GC — Guanium Chip

GC breaks a guanium pattern into small chip-like sections. The uneven arrangement creates varied reflection angles and a rougher, fragmented scale effect.

GG — Guanium Ghost

GG is intended to reproduce the sheen of baitfish scales. It flashes metallic when it catches light but becomes more translucent under lower illumination. A catalog example is Dog-X Jr. Coayu GG Megabass Kinkuro.

Close comparison of Megabass GG Guanium Ghost and GP Guanium Phantom finishes.

GG produces a stronger scale-like flash, while GP keeps more of the body see-through. Source: Image: Megabass

Finish Codes GLOW–IL

GLOW — Glow

GLOW identifies a luminous treatment. It is different from M, LZ, NC, and other finishes that need available light to create a reflected flash.

GLX — Galaxy

GLX uses fine reflective particles built through layers of clear coating. The small flakes create distributed highlights and a sense of depth rather than one flat reflective plane.

GP — Guanium Phantom

GP combines a largely see-through body with restrained guanium reflection. The side profile stays more transparent than GG while still producing flash at an angle. Examples include X-70 GP Phantom and colors such as GP PRO BLUE.

GS — Guanium Smoke

GS is Guanium Smoke. Megabass identifies it as the finish used below the lateral line in HT patterns and as the treatment from which SF was developed.

HAKUSEI — Hakusei

HAKUSEI means taxidermy in Japanese. Megabass describes it as an artistic treatment painted with techniques associated with fish taxidermy, producing a detailed fish-like appearance.

HIDE — Hide

HIDE applies special paint over an underlying pattern. The viewing angle and illumination determine how clearly the base pattern appears, so the design can become more visible or more concealed as conditions change.

HT — Halftone

HT combines MG (Mirror Ghost) above the lateral line with GS (Guanium Smoke) below it. The change in light transmission between the upper and lower body creates contrast during movement.

IL — Illusion

IL identifies an angle-dependent color-shifting treatment, commonly applied to the lure's back. Megabass documents shifts such as purple to blue and orange to green. IL can appear with another finish code, as in GP IL PHANTOM.

Finish Codes LZ–SG

LZ — Laser

LZ identifies a holographic finish with a changing reflective appearance. Megabass uses Laser as the name of the hologram treatment rather than as a description of emitted light.

M — Metal

M identifies an opaque, strongly reflective metallic finish. Megabass describes it as closer to a mirror finish than WAGIN, with a clear silhouette when viewed from below.

MAT — Matte

MAT identifies a matte or half-matte surface treatment. It reduces gloss and can make the painted silhouette read more clearly without relying on reflected flash.

MG — Mirror Ghost

MG uses partial chrome deposition to combine reflection with translucency. Stronger illumination can make it look more mirror-like, while weaker light reveals more of the see-through body.

NC — Neon Core

NC places a crushed-pattern reflective core vertically inside a clear lure body. The insert flashes from within the lure; Neon Core does not mean that the lure generates light. Prop Darter 80 NC Ayu is one catalog example; ayu is the Japanese sweetfish.

Megabass Neon Core reflective insert visible inside a clear lure body.

NC places a crushed reflective core inside a clear body; it is an internal reflector, not a glow finish. Source: Image: Megabass

PG — Pearl Gold

PG identifies Pearl Gold. Megabass documents it as a specialized, subdued pearlescent-gold treatment developed for VISION 95 PG AYU, using multiple pigment layers to control glare. Ayu is the Japanese sweetfish.

PM — Pearl Mica

PM uses layered paint to produce a soft, whitish pearlescent reflection. Its appearance emphasizes gradual changes in tone rather than the sharper flash of a mirror-like metallic finish.

SF — Stealth Flash

SF combines translucency and reflection. Megabass places it between GP and GG: less transparent than GP, but with a softer flash than GG.

SG — Super Ghost

SG means Super Ghost. Megabass identifies it as the predecessor to PM in its explanation of Pearl Mica. It is best treated as a legacy finish reference rather than assumed to be available on current models.

Finish Codes SH–WAKIN

SH — Shell

SH uses a wave-pattern holographic treatment intended to suggest the pearly inner surface of a shell. It is relatively low in light transmission and is therefore more metallic than the semi-transparent SS finish.

SS — Shell Skin

SS combines a shell-like flash with a semi-transparent ghost appearance. The translucency distinguishes it from SH. AB, by contrast, specifically identifies an actual abalone plate inside the lure.

ST — Stealth

ST applies foil to only part of the lure body. The selective foil can reduce the apparent size of the reflective area while still producing distinct flashes as the lure moves.

WAGIN — Wagin

WAGIN is the romanized form of wagin, literally “Japanese-style silver.” It uses vapor-deposited aluminum to produce a softer, more subdued silver appearance than the stronger mirror-like M treatment.

Close comparison of Megabass M Metal and WAGIN silver finishes.

M is the stronger mirror-like metallic treatment; WAGIN uses a softer, subdued silver appearance. Source: Image: Megabass

WAKIN — Wakin

WAKIN is the romanized form of wakin, literally “Japanese-style gold.” It identifies a restrained gold finish with a soft luster.

What the Code Does—and Does Not—Tell You

The finish code helps you predict the lure's broad visual behavior, but it does not completely define the finished color. GP PRO BLUE, GP WAKASAGI (wakasagi is Japanese smelt), and GP AVOCADO share a base approach while using different paint patterns. Body shape, scale molding, back color, belly color, and the amount of clear material can all change the final appearance.

Availability also changes by product, market, and production year. A code documented by Megabass may be absent from the current color chart of the lure you are considering. Use this guide to interpret the name, then confirm the exact product image and current color list.

Choosing a Starting Finish

If you want a more transparent starting point, compare GP, MG, SF, and SS. For stronger reflected flash, compare GG, GC, M, and LZ. For an internal reflective element, look for AB or NC. When you want to reduce gloss, MAT and FF describe different ways of changing the surface rather than adding more flash.

These are visual categories, not guaranteed fishing rules. Water color, depth, light angle, forage, lure action, and retrieve speed all affect how a finish appears underwater.

[[JDMAS:megabass-lures-collection]]

Key official references