SMITH Rod Model Numbers Explained

A SMITH rod number can reveal useful information about length, power, reel type, and construction—but the naming pattern changes between series. TRMK-423UL identifies a three-section trout rod, while HSJ-SSL64/2L is a full one-piece spinning rod despite the “/2” within its code. The characters need to be read in the context of the product family.

The practical approach is to identify the series first, then compare the remaining characters with its published specifications.

Featured image source: Image: SMITH

This guide explains documented examples across SMITH’s trout, bass, snakehead, and saltwater ranges. It includes both newer and older models, so it should be used as a naming guide rather than a complete list of rods currently in production.

Five Things to Look For—Not One Universal Formula

When reading a SMITH model number, look for five types of information:

Information	What to establish
Series	Which product family does the rod belong to?
Reel configuration	Is it a baitcasting or spinning model?
Length and sections	Do the numbers represent feet and inches, section count, or a combination?
Power	Does the code contain a power designation that matches the specification table?
Additional designation	Does the suffix identify a technique, construction, or product variant?

These are questions to ask, not five blocks that must appear in a fixed order.

For example, TLB-53DT is a spinning rod with a published Medium power rating, even though its code does not contain a separate S for spinning or M for power. Those specifications come from the product page.

Similarly, a designation used in a model name may differ from the power listed in the specification table. The Super Strike examples below demonstrate why the published specifications remain important even when a code looks familiar.

Trout Rods: Length, Section Count, and Technique Designations

Troutin’ Spin MultiYouse: Reading the TRMK Number Block

MultiYouse places length and section count together in model numbers such as TRMK-423UL and TRMK-805M. Source: Image: SMITH

The MultiYouse range provides clear examples of length and section count appearing together.

Model	Length	Sections	Configuration	Power
TRMK-423UL	4'2"	3	Spinning	Ultra Light
TRMK-C423L	4'2"	3	Baitcasting	Light
TRMK-805M	8'0"	5	Spinning	Medium

These combinations match SMITH’s individual model descriptions and specifications.

For TRMK-C423L, the useful separation is:

TRMK / C / 42 / 3 / L

Here, TRMK identifies the family, C distinguishes the baitcasting model, 42 corresponds to 4'2", 3 identifies the three-section configuration, and L matches the published Light power.

The important qualification is that this interpretation belongs to the TRMK naming pattern. It should not be applied automatically to every three-digit number on a SMITH rod.

[[JDMAS:smith-multiyouse-trmk-423ul]]

Dagger Stream: Telescopic Construction

Dagger Stream uses TEC and TES to distinguish telescopic casting and spinning configurations. Source: Image: SMITH

Dagger Stream uses codes such as DS-TEC47L and DS-TES50L. SMITH lists these as six-section telescopic models, with casting and spinning versions presented separately.

Model	Published configuration	Length	Power
DS-TEC47L	Six-section telescopic baitcasting rod	4'7"	Light
DS-TES50L	Six-section telescopic spinning rod	5'0"	Light

Within this family, TEC corresponds to the telescopic casting configuration and TES to the telescopic spinning configuration. The following numbers identify length; they do not state the number of telescopic sections.

This is a different reading pattern from TRMK. A Dagger Stream rod’s six-section construction must be confirmed from the series specifications rather than inferred from a final digit.

[[JDMAS:smith-dagger-stream-ds-tec47l]]

Lagless Boron: Use the Published Model Name

SMITH presents TLB-53DT as D-twitcher53. It is a 5'3" spinning model with Medium power and a Fast action, within a range developed for twitching heavy sinking minnows.

The related TLB-45DT/3 is a 4'5", three-section model. SMITH specifically identifies it as the three-piece version, while the other models on that product page are two-piece rods.

For this series, the documented name D-twitcher is more useful than inventing a separate expansion of DT. The number and suffix can be explained through the actual specifications without assigning an unsupported English phrase to every letter.

IL FLUSSO: TR Means Twitch & Retrieve

IL FLUSSO provides an example where SMITH explicitly explains a suffix: TR denotes “Twitch & Retrieve.”

The TILF-48TR is listed as a 4'8", Light-power, two-piece spinning rod. Its description includes twitching heavy sinking minnows as well as using spoons, spinners, and other small plugs.

Here, TR describes the intended style of lure operation. It does not replace the separate power, action, lure, and line specifications.

Bass Rods: Model Names and Power Ratings Are Not Always Interchangeable

Super Strike Water Spider: “Medium” in the Name, Medium Light in the Specifications

SS-WS55TM belongs to the Super Strike Water Spider range and is presented under the name Water Spider Topwater Medium. However, its specification table lists Medium Light power, a Moderate action, and a length of 5'5".

The distinction matters. Treating TM as a direct instruction to enter “Medium” in a comparison table would conflict with SMITH’s published power rating.

For this model, use the complete model name for identification and Medium Light for the specification.

[[JDMAS:smith-super-strike-ss-ws55tm]]

Topwater Traveler: What “/B” Identifies

SMITH lists SS-TT60L3 as a 6'0", three-section Topwater Traveler. Despite the L in the model number, its published power is Medium Light.

The corresponding SS-TT60L3/B is explicitly offered without the grip.

The distinction should be written as:

SS-TT60L3/B — grip not included

“Without grip” is clearer than “bare blank,” which could suggest an unfinished component for rod building. Preserve the official /B notation rather than changing it to a parenthetical “(B).”

FGO-65L: Do Not Override the Published Length

The FGO-65L Hatory’s Stick is a reissue of a model originally released in 1986. SMITH describes its construction as two-section, one-and-a-half, combining a glass tip section with a carbon-and-glass butt section.

Its official specification table lists a length of 6'6", not 6'5".

That makes FGO-65L an important exception to a simple feet-and-inches interpretation. When documenting this model, reproduce the manufacturer’s listed length rather than recalculating it from “65.” The published construction also does not, by itself, establish the meaning of each letter in FGO.

Strategy Tourler: Separate the Documented Application from the Initials

SMITH’s product illustration for STC-HM63BF, reproduced by CasterHouse, identifies it as S-Master Bait Finesse and a one-piece baitcasting model. Those are documented characteristics of the product.

The bait-finesse application can therefore be explained without assigning additional, unverified meanings to HM.

Likewise, manufacturer artwork for TVC-71MH/HG places it within Hybrid Glass Casting Models. This supports identifying it as a hybrid-glass casting model; it does not justify interpreting HG as a general “heavy-cover” designation.

For older models, a contemporary manufacturer description or product illustration is preferable to an acronym expansion reconstructed from the letters alone.

Snakehead Rods: Magnum Husky NEX and the 2026 Numbering

The 2026 Magnum Husky NEX number block combines length with a final 2 for the two-section construction. Source: Image: SMITH

SMITH states that the Magnum Husky NEX lineup was renewed for 2026 with all models using two-piece construction. The series consists of baitcasting rods.

The following model numbers correspond directly to their listed lengths, section counts, and power designations:

Model	Length	Sections	Published power
MHN-742H	7'4"	2	Heavy
MHN-752SH	7'5"	2	Super Heavy
MHN-762XH	7'6"	2	Extra Heavy

In 742, for example, 74 corresponds to 7'4" and the final 2 identifies the two-section model. The same relationship applies to 752 and 762.

This is a documented change within one family. It should not be turned into a manufacturer-wide theory that section counts placed inside a number block signify better construction—or that a slash suffix denotes a secondary or backup rod.

When comparing different generations, retain the complete model number and consult the specifications for that particular version.

Saltwater and Expedition Rods: The Position of a Letter Matters

Offshore Stick OLP: A Casting Rod Can Still Use a Spinning Reel

In OLP codes, J3 and C4 describe fishing application and section arrangement while every model remains a spinning rod. Source: Image: SMITH

The OLP Lim Pack70 series makes the distinction between reel configuration and fishing method especially clear.

SMITH states that all models are spinning rods. Within the range, J3 identifies unequal-section, three-piece jigging models, while C4 identifies unequal-section, four-piece casting models.

For OLP-S76XH/C4, the useful reading is:

Component	Interpretation within this model
OLP	Offshore Stick OLP family
S	Spinning configuration
76	7'6"
XH	The model’s power designation
/C4	Four-section casting configuration

The C in /C4 refers to casting as a fishing method—not to a baitcasting reel.

Similarly, OLP-S55ML/J3 is a 5'5" spinning jigging rod with three unequal sections and a published packed length of 70 cm.

[[JDMAS:smith-olp-s76xh-c4]]

Offshore Stick AMJX: A Series Name Is Not Necessarily a Complete Acronym

In the AMJX range, SMITH identifies C61 models as baitcasting rods and S62 models as spinning rods. The lineup uses full one-piece construction.

Accordingly, AMJX-C61H is a 6'1" baitcasting model within the AMJX series.

SMITH documents the use of Armor Nanox Graphite, combining materials using Toray’s Nanoalloy technology with lower-modulus, high-strength graphite. This is a stated material specification for the family. It should be explained as such, rather than presented as a proven letter-by-letter expansion of AMJX.

[[JDMAS:smith-amjx-c61h]]

HSJ-CS: More Than a Short Solid Tip

HSJ-CS66/M is listed as a 6'6", Medium-power, full one-piece baitcasting rod for slow-jigging and slow-jerk presentations.

Its construction is more specific than the phrase “solid tip plus tubular blank” suggests. SMITH describes solid carbon extending from the tip to the front of the reel seat, woven-graphite reinforcement through the lower portion, and tubular carbon in the grip section.

The slash in 66/M separates the length designation from the power designation. It is not introducing a section count.

These documented construction details are sufficient to explain the model without assigning an unsupported full English name to CS.

HSJ Superlight: “/2L” Does Not Mean Two Pieces

HSJ-SSL64/2L is a full one-piece rod, showing why /2L cannot be read as a two-section suffix. Source: Image: SMITH

HSJ-SSL64/2L is a 6'4", full one-piece spinning rod with full-solid carbon construction. SMITH lists it as a Super Light model for super-light jigging.

The same page lists HSJ-SSL64/3L and HSJ-SSL64/L, also as full one-piece rods. Their published lure limits differ: up to 50 g, 75 g, and 100 g for /3L, /2L, and /L respectively.

The practical lesson is straightforward: read the entire suffix before deciding what a number means. The “2” inside /2L cannot be isolated and treated as a two-piece designation.

[[JDMAS:smith-hsj-ssl64-2l]]

Offshore Stick GTK: A Documented Material Name

GTK is an example where SMITH explicitly explains the material designation: Graphite, Titanium & Kevlar. Its GTK30-40 material combines 30-ton and 40-ton graphite with titanium fiber and Kevlar.

The manufacturer also presents GTK-70SJH and GTK-80SJX as Surface Jerking models. Their listed lengths are 7'0" and 8'0" respectively.

That supports explaining the GTK material name and the Surface Jerking application. It does not require assigning a separate target-fish meaning to every remaining letter.

Bayliner MK: Section Labels Need Their Construction Notes

The Bayliner MK examples show why the section count and joint arrangement should be read together.

Model	Length	SMITH’s construction description
BL-681L/MK	6'8"	One-piece model with detachable grip
BL-702ML/MK	7'0"	Two-piece model

These are the descriptions used on the official product page.

The family is developed for small-plug fishing targeting species such as juvenile trevally and barracuda, and its specifications include Fuji K guides. However, the documented use of K guides should not be turned into an unverified expansion of the MK designation.

[[JDMAS:smith-bayliner-bl-702ml-mk]]

K.O.Z Expedition: Preserve the Full Model Identifier

K.O.Z Expedition includes several construction patterns, so the full model identifier and specifications must be preserved. Source: Image: SMITH

K.O.Z Expedition includes casting, spinning, and jigging models. The following examples show several different construction descriptions within the family:

Model	Published identification
KOZ.EX-S68SL/2	6'8", Super Light spinning rod; two-piece construction.
KOZ.EX-C65LH	6'5", Light Heavy baitcasting rod; detachable-grip two-piece construction with a one-piece blank.
KOZ.EX-C67TH/2	6'7", Heavy baitcasting rod; two-piece construction.
KOZ.EX-C60L/J2	6'0", Light-power baitcasting jigging rod; unequal-section two-piece construction.

Two details are particularly useful. C65LH is not described as a one-and-a-half rod, and C67TH/2 has a published Heavy power rating, rather than a separate “Tough Heavy” category.

The spinning range also includes S74YT, S80BGT, and S76BTH, which SMITH describes as unequal-section two-piece models. Their product descriptions identify target applications, but the initials should be retained as model identifiers unless their full meanings are explicitly documented.

Quick Reference: Interpret the Code Within Its Series

The following table summarizes the most useful patterns. Each interpretation is limited to the example shown.

Pattern or designation	Example	Confirmed interpretation
C before the length	AMJX-C61H	Baitcasting configuration in the AMJX range.
TEC / TES	DS-TEC47L / DS-TES50L	Dagger Stream telescopic casting / spinning models.
Final digit in a three-digit block	TRMK-423UL	4'2", three sections.
Final 2 in the length-and-section block	MHN-742H	7'4", two sections.
/3	TLB-45DT/3	Three-piece version of the 4'5" Lagless Boron model.
TR	TILF-48TR	Twitch & Retrieve.
/B	SS-TT60L3/B	Grip-not-included option.
/HG	TVC-71MH/HG	Hybrid-glass casting model.
/J3 / /C4	OLP series	Three-section jigging / four-section casting models; both use spinning configurations.
/2L	HSJ-SSL64/2L	Model designation within a full one-piece series—not a section count.

The table is a reference to documented examples, not a universal translation key.

What to Check Beyond the Model Number

Confirm the Published Power and Lure Rating Separately

A power designation is only one part of a rod’s specification. Do not use a letter or a model name to manufacture a lure-weight range.

The examples above also show why a name and a specification should remain separate fields: SS-WS55TM and SS-TT60L3 both have published Medium Light ratings, despite containing different power-like letter combinations.

For a comparison table or product listing, copy the manufacturer’s power, action, lure, and line entries individually.

Check the Joint Arrangement, Not Just the Section Count

SMITH describes BL-681L/MK as a one-piece rod with a detachable grip, but KOZ.EX-C65LH as a detachable-grip two-piece rod with a one-piece blank. The counting convention differs between those product descriptions.

For transport planning, record both the construction description and the packed length. “Two pieces” alone does not tell you whether a rod separates at the handle, farther along the blank, or into unequal sections.

Do Not Infer Performance from the Position of a Number

A section count placed after a slash does not mean the rod was intended only as a spare. SMITH describes the OLP range—which uses /J3 and /C4—as having been developed for use as a main rod.

The location of a numeral is a naming convention. Joint strength, bending behavior, material construction, and intended use require their own supporting product information.

[[JDMAS:smith-brand-collection]]

Conclusion: Identify the Family Before Decoding the Details

SMITH’s model numbers become easier to understand once they are read series by series, rather than forced into one manufacturer-wide formula.

Start with the complete product family and model identifier. Then confirm the length, reel configuration, power, section count, and joint arrangement against the appropriate specifications. Expand a suffix only when its meaning is documented; otherwise, retain the code and explain the verified characteristics of the rod.

The model number helps identify the rod. The product specifications establish what it is.

Key official references

• Trout rods: MultiYouse, Dagger Stream, Lagless Boron, and IL FLUSSO
• Super Strike
• Magnum Husky NEX
• Offshore rods: OLP, AMJX, HSJ Superlight, and GTK
• Bayliner MK and K.O.Z Expedition