On this page
Abu Garcia rod names such as HSPS-664L MGS and ERFS-67SULT-ST-TZ contain useful information about the rod’s configuration. Length, power, section count, tip construction, and guide specifications may appear within the code—but not every series includes the same information in the same position.
The most reliable approach is to identify the product family first, separate the recognizable components, and then confirm the remaining details in the specifications. For example, WMSC-734H is a casting rod even though its prefix contains an S. Its official specification table identifies it as BC, or baitcasting.
This guide focuses on Japanese-market Abu Garcia rods and includes historical models as naming examples. It is not a complete catalog or a claim that every model discussed remains in production.
Four Types of Information to Look For
Rather than expecting four blocks separated by hyphens, look for four broad categories of information:
| Part of the designation | Information it may provide | Example |
|---|---|---|
| Prefix | Product family and reel configuration | HSPS, ERFS, WMSC |
| Numerical section | Nominal length and, in some series, section count | 664, 734, 1062 |
| Power and related letters | Power designation and sometimes tip construction or action | L, MH, SULT, ST |
| Additional designation | Guide system or other model-specific feature | MGS, KR, TZ |
These categories help organize the code; they are not a manufacturer-wide formula.
For example, HSPS-664L MGS can be separated as:
HSPS / 66 / 4 / L / MGS
The model is a Hornet Stinger Plus spinning rod with a nominal length of 6'6", four sections, Light power, and the Micro Guide System. The preserved product specifications also list a Regular Fast action, but RF does not appear in the model number.
Preserve spaces, hyphens, and the complete suffix when recording a model. They help distinguish similarly named products, even when they do not divide the code into identical categories.
Prefixes: Identify the Series Before Reading C or S
In many Japanese-market Abu Garcia families, the final letter of the prefix corresponds to the reel configuration. However, searching the entire model number for any occurrence of C or S is not sufficient.
Common Prefix Examples
| Prefix | Product family or grouping | Configuration in the examples discussed |
|---|---|---|
| HSPC | Hornet Stinger Plus | Casting |
| HSPS | Hornet Stinger Plus | Spinning |
| ERFS | Eradicator Realfinesse | Spinning |
| WMSC / WMCC | World Monster | Casting |
| SXJS | Salty Stage KR-X Shore Jigging | Spinning |
The Hornet Stinger Plus manufacturer’s application chart separates casting and spinning models, while the World Monster specifications identify WMSC and WMCC examples as BC models. The Realfinesse and KR-X model information establishes the other associations shown here.
The distinction is particularly important for WMSC. Its S is part of the product-family prefix; it does not turn WMSC-734H into a spinning model.
When a specification table includes a Type field, use it to confirm the configuration. Abu Garcia’s Japanese tables commonly use SP for spinning and BC for baitcasting, as shown in the Hornet Spears lineup.
Numbers: Length and Section Count Are Related, but Not Always Combined
Read Length in Feet and Inches
The length portion combines feet and inches without a separator.
| Length code | Correct reading | Approximate metric conversion |
|---|---|---|
| 56 | 5'6" — 5 feet 6 inches | 1.68 m |
| 66 | 6'6" — 6 feet 6 inches | 1.98 m |
| 67 | 6'7" — 6 feet 7 inches | 2.01 m |
| 73 | 7'3" — 7 feet 3 inches | 2.21 m |
| 106 | 10'6" — 10 feet 6 inches | 3.20 m |
These metric figures are rounded conversions. For an individual product listing, retain the manufacturer’s measurement.
Feet-and-inches notation is not decimal feet. Six feet six inches is 6.5 ft, not 6.6 ft. Writing 6'6" or 6 ft 6 in avoids that ambiguity.
When the Final Digit Identifies Sections
Some models add a section-count digit after the length:
664 → 6'6" + four sections 734 → 7'3" + four sections 1062 → 10'6" + two sections
These readings match HSPS-664L MGS, WMSC-734H, and SXJS-1062MH60-KR respectively.
When Section Count Is Not Encoded
The same rule cannot be applied to every family.
Abu Garcia lists ERFS-46Pro-ST as a 4'6", one-piece rod and ERFS-51Pro-FS as a 5'1", two-piece rod. Neither code adds a separate section-count digit after the length.
Similarly, ERFS-67SULT-ST-TZ has two sections, but the 67 identifies only its 6'7" length. The section count comes from its specifications.
For transport planning, confirm the joint arrangement and packed length as well as the number of sections. A section count alone is not enough to calculate the space a rod requires.
Power, Action, and Tip Construction Are Separate Specifications
Power Designations
The following power labels appear across the Japanese-market ranges discussed in this guide:
| Code | Power name |
|---|---|
| SUL | Super Ultra Light |
| UL | Ultra Light |
| L | Light |
| ML | Medium Light |
| M | Medium |
| MH | Medium Heavy |
| H | Heavy |
| XH | Extra Heavy |
These names are supported by the Realfinesse, Hornet Spears, and other product specifications. They should not be treated as fixed lure-weight categories across every fishing application.
For example, two Salty Stage Prototype Tai Rubber rods are both rated UL, yet their operating ranges differ:
| Model | Power | Lure range |
|---|---|---|
| XTRC-642ULS60-ST | UL | 20–100 g |
| XTRC-762ULT80-ST | UL | 30–120 g |
These are tai-rubber specifications, not general shore-casting allowances. They demonstrate why “UL” cannot universally mean “for micro lures.” Read the rating in the context of the rod’s intended application.
Preserve any modifier attached to a power designation, but do not calculate a lure range or strength value from it. The numerical specifications remain separate.
Action Is Not Necessarily Written into the Code
Abu Garcia’s specification tables use action labels such as Fast, Regular Fast, Regular, and Slow. Sometimes the action is represented in the model number; sometimes it is not.
For example, WMSC-734H is listed as Regular Fast, although RF does not appear in its code. By contrast, ERFS-67SULT-ST-TZ was officially introduced as the Slow Taper Special.
Do not insert an assumed action into a product description simply because the rod is Light, Heavy, solid-tipped, or tubular.
S, T, and ST Must Be Read in Context
The Tai Rubber examples make the distinction clear:
| Model | Tip construction | Action |
|---|---|---|
| XTRC-642ULS60-ST | Solid | Slow taper |
| XTRC-762ULT80-ST | Tubular | Slow taper |
The manufacturer explicitly describes the first as a solid-tip, slow-taper rod and the second as a tubular-tip, slow-taper rod. In these model names, S or T identifies the tip, while ST identifies the slow taper.
[[JDMAS:abu-tai-rubber-solid]]
[[JDMAS:abu-tai-rubber-tubular]]
Likewise, in ERFS-67SULT-ST-TZ, read SULT as SUL power + T for tubular, then read ST separately as Slow Taper. The model should not be described as solid-tipped merely because ST appears later in its name.
MGS, KR, TZ, and TAF: What the Technology Names Describe
These terms refer to different aspects of the rod. A guide system, a guide-ring material, and a blank-manufacturing process are not interchangeable.

Guide-system labels such as MGS, KR, and TZ describe different aspects of the guide package and must be read model by model. Source: Image: Abu Garcia / Pure Fishing Japan
MGS: Micro Guide System
MGS identifies Abu Garcia’s Micro Guide System in models carrying that designation. The manufacturer describes its micro-guide approach in terms of reduced guide weight, closer integration with the blank, and control of line movement. These are development objectives, not a guarantee of the same performance improvement on every rod.
The suffix also does not list every component used in the guide assembly. Ring and frame materials should be confirmed separately.
KR: Fuji’s KR Guide Concept
KR refers to the Fuji KR Guide Concept in the relevant models. Manufacturer artwork for SXJS-1062MH60-KR displays the K-R Concept designation, while Abu Garcia’s Salty Stage technical information separately identifies the guide rings used in that range.
This separation matters: KR identifies a guide concept, not one universal ring or frame material.
TZ: Torzite Rings in the Relevant Models
For ERFS-67SULT-ST-TZ, the manufacturer’s product illustration specifies Fuji titanium guides, Torzite rings, and the KR Guide Concept. These details support the interpretation of TZ for this model.
When describing another TZ-designated rod, confirm its own component specifications rather than copying the complete guide configuration from this example.
TAF: Triarchy Force
TAF stands for Triarchy Force, Abu Garcia’s blank-development and manufacturing approach. The official explanation identifies revisions to materials, design, and manufacturing, including CPC blanks, DPH construction, and NS taper.
TAF is not necessarily a suffix. The Eradicator Realfinesse Prototype range documents TAF construction even though names such as ERFS-46Pro-ST do not include those letters. Its product page separately identifies T1100G and M40X materials.

TAF describes a broader blank-development and manufacturing approach; it is not necessarily printed in the model number. Source: Image: Abu Garcia / Pure Fishing Japan
A model number may name some technologies without listing all of them. The product description supplies the rest.
Four Model Numbers, Worked Through
The examples below retain the original model identifiers. Older specifications are identified as preserved product information rather than presented as a current lineup.
HSPS-664L MGS — Hornet Stinger Plus
HSPS / 66 / 4 / L / MGS
The code identifies a Hornet Stinger Plus spinning rod, nominally 6'6", with four sections, Light power, and the Micro Guide System.
The preserved specification table adds details not visible in the code: 198 cm overall length, Regular Fast action, tubular construction, and a 52.9 cm packed length.
This is a useful distinction when reading the model: four sections are encoded, but the exact storage length and action are not.
ERFS-67SULT-ST-TZ — Eradicator Realfinesse
ERFS / 67 / SUL / T / ST / TZ
The designation identifies a 6'7", Super Ultra Light spinning model with a tubular tip, Slow Taper specification, and Torzite-ring guides. Pure Fishing Japan’s 2018 announcement explicitly calls it the Slow Taper Special, while the product specifications identify its tubular construction.
Its two-section construction is a separate specification, not something contained in 67. Manufacturer product artwork also documents TAF construction, titanium guides, and the KR Guide Concept. None of those additional details should be inferred from TZ alone.
WMSC-734H — World Monster
WMSC / 73 / 4 / H
This is a 7'3", four-section, Heavy-power casting rod. The official table lists 221 cm, Regular Fast action, tubular construction, and a 60 cm packed length.
The example illustrates two different checks: the final C in the prefix is consistent with the casting configuration, while the S elsewhere in WMSC is not a spinning identifier. The RF action and packed length still require the specification table.
SXJS-1062MH60-KR — Salty Stage KR-X Shore Jigging
SXJS / 106 / 2 / MH / 60 / KR
The preserved specifications identify a 10'6", two-section, Medium Heavy spinning rod with a Regular action and Fuji’s KR Guide Concept. Its listed lure range is 20–80 g. The 60 in the model number must therefore not be presented as a 60 g maximum.
A similarly named but different model, XSJS-1062MH60 in the Salty Stage Prototype range, has an official lure range of 20–90 g and a separate Best Jig: 60 g entry. This demonstrates why a recommended jig weight and a maximum lure rating must remain separate—and why the newer specification must not be transferred to the older SXJS model.
Comparison of the Four Examples
| Model | Reel type | Length | Sections | Power | Action | Additional information |
|---|---|---|---|---|---|---|
| HSPS-664L MGS | Spinning | 6'6" | 4 | L | Regular Fast | Tubular; MGS |
| ERFS-67SULT-ST-TZ | Spinning | 6'7" | 2 | SUL | Slow | Tubular; Torzite; TAF |
| WMSC-734H | Casting | 7'3" | 4 | H | Regular Fast | Tubular; 60 cm packed length |
| SXJS-1062MH60-KR | Spinning | 10'6" | 2 | MH | Regular | KR concept; 20–80 g lure range |
HSPS and SXJS specifications are preserved in historical product listings. ERFS information is supported by the manufacturer’s announcement and product artwork together with preserved specifications; WMSC details are on Abu Garcia’s official product page.
The table deliberately separates power from action and construction. Information found in the specification sheet is included without implying that every field can be decoded directly from the name.
Using the Code Without Overreading It
Begin with the complete series name and model identifier. Similar-looking strings can describe different generations, and a small prefix or suffix change may matter.
Next, separate the parts that have a documented meaning. Read feet and inches correctly, identify the reel configuration within the relevant family, and check whether the numerical block actually includes a section count.
Finally, confirm the fields the code does not establish: lure and line ratings, action, tip material, joint arrangement, packed length, guide components, and blank construction. Keep operating examples—such as a recommended jig weight—separate from limits.
A useful model-number guide does not eliminate the specification sheet. It helps you find the right sheet and understand why its individual fields matter.
[[JDMAS:abu-garcia-brand-collection]]
Conclusion
Abu Garcia’s Japanese-market rod codes become easier to read once the product family and the position of each character are taken into account.
The main distinctions are practical: C or S must be read in context; feet and inches are not decimal feet; section count is not always encoded; and ST can identify a slow taper independently of solid or tubular tip construction. Technology names add further information, but they do not necessarily appear in every model that uses the technology.
Read the code as an identification tool, then use the specifications to complete the description.
Reviewed on November 17, 2026. This guide includes historical naming examples. Where older manufacturer product pages are no longer accessible, the cited sources include preserved product specifications and manufacturer artwork hosted by Japanese tackle retailers.