JDM Angler Supply is now open — authentic JDM tackle, shipped worldwide.

Country/Region / Language

  • Worldwide Shipping

  • Extensive Product Selection

  • Authentic JDM Tackle

  • Expert Tackle Support

Olympic Graphiteleader Rod Model Numbers Explained

Decode Olympic Graphiteleader rod codes by series, reel type, nominal length, section count, power, and tip suffix.

Olympic Graphiteleader rod model number guide featuring an actual Bellezza Prototype rod.

A model number such as 23GCORS-572UL-TS contains several useful identifiers. Once separated, it points to the product family, reel configuration, nominal length, section count, power, and tip type. Olympic’s product specifications confirm how those elements apply to this particular rod.

The naming pattern is not identical across the entire Graphiteleader range. Some rods omit a model-year prefix, while others do not include a separate section-count digit. The key is to recognize the common patterns without treating them as rules that override the specification sheet.

This guide explains those patterns through documented examples, with particular attention to Olympic’s solid, hard-solid, titanium, glass, and tubular tip designations.

Start by Separating the Code

For many Graphiteleader models, the following reading order is useful:

Model year, where present → Product-family prefix → Reel type → Length and sections → Power → Additional suffix

Consider 23GCORS-572UL-TS:

Component Meaning in this example
23 2023 model-year identifier
G Prefix used in Graphiteleader model numbers
COR CORTO family
S Spinning configuration
57 Nominal length of 5 feet 7 inches
2 Two sections
UL Ultra Light power
TS Titanium solid tip

Olympic’s specifications list this model at 1.70 m, with two sections, UL power, an Extra-Fast action, and a 0.6 mm tip diameter. Length, power, and tip type are recognizable in the code; the action and tip diameter come from the specification table.

This separation is a reading aid, not an official requirement that every Olympic rod must contain the same number of elements.

Model Years, Product Families, and Reel Types

A Model-Year Prefix Is Not a Manufacturing Date

Where a two-digit year appears, it helps identify the model generation. It should not be treated as the manufacturing date of an individual rod or assumed to be the exact calendar year in which sales began.

For example, Olympic identifies 27GPAGUC-662L-S as a 2027 model, while its official product page already listed it for advance sale when checked in November 2026. The model-year designation and the actual sales period are therefore not necessarily identical.

Some product names include a year that is absent from the model number. The 24 SUPER CORTO page, for instance, lists GCORSS-582UL-HS+ without an initial “24.” Preserve the manufacturer’s complete model identifier rather than adding a year to make it resemble another series.

Nor does the year determine every material used. Olympic’s 23 CORTO page documents a running change from Lightweight Graphite Cloth to Graphite Cloth LV under the existing model designations.

Recognizing Product-Family Letters

The following associations appear in Olympic’s model names. They are useful examples rather than an exhaustive dictionary covering every generation.

Letters within the prefix Product family Documented example
COR CORTO 23GCORS-572UL-TS.
ARG ARGENTO GARGPC-682MH.
BEL BELLEZZA 26GBELPS-572XUL-S.
CAL CALAMARETTI 26GCALPC-552ML-TS.
TIR TIRO 24GTIRC-762MH.
SIL SILVERADO 23GSILC-762ML.
PAG PAGRO 24GPAGUC-632ML-S.
CM COMPATTO GCMC-705M.

Retain the complete product name when identifying a rod. Family letters alone do not distinguish every version, subseries, or generation.

Separate P and U from the Following S or C

In the examples below, P corresponds to PROTOTYPE and U corresponds to UX, while the following letter identifies the reel configuration.

Prefix ending Reading in these examples Example
PS PROTOTYPE + spinning 26GCORPS-582UL-HS+
PC PROTOTYPE + baitcasting 26GCALPC-552ML-TS
US UX + spinning 23GCORUS-542UL-S
UC UX + baitcasting 26GCORUC-612UL-HS

The official product pages place these models in the corresponding product lines and spinning or baitcasting categories. Reading P/U separately from S/C avoids counting the same S twice or treating “PS” as a grade with no reel-type information.

PROTOTYPE should not automatically be translated as “the highest model in every family.” Olympic describes SUPER CORTO as its flagship ajing rod, so the hierarchy must be checked within the relevant product range.

The Position of S Matters

In 23GCORUS-542UL-S, the S before the first hyphen identifies the spinning configuration. The final -S identifies the solid tip. Identical letters can perform different jobs depending on their position.

Reading Length and Section Count

The Common Length-Plus-Sections Pattern

Many models combine a feet-and-inches length with a final section-count digit.

Number block Reading when the model uses this pattern Approximate length conversion
572 5'7", two sections 1.70 m
6102 6'10", two sections 2.08 m
832 8'3", two sections 2.51 m
862 8'6", two sections 2.59 m
705 7'0", five sections 2.13 m

The relationship is confirmed by examples such as 23GCORS-572UL-TS, 26GCORPS-6102L-HS+, and GCMC-705M. The metric figures above are rounded mathematical conversions, not replacement measurements for individual products.

A useful illustration is COMPATTO: 7'0" converts to 2.1336 m, but Olympic publishes 2.14 m for GCMC-705M. Use 2.13 m in a rounded conversion table and 2.14 m when reproducing that rod’s official specification.

Why the Last Digit Is Not Always the Section Count

The VIGORE lineup contains clear exceptions:

Model length construction
GVIGS-610ML 2.08 m One piece
GVIGS-6102ML 2.08 m Center-joint two-piece model
GVIGC-77XH 2.31 m Two sections with a detachable grip

In GVIGS-610ML, “610” is the length designation; the final zero is not a section count. The related GVIGS-6102ML adds a 2. Meanwhile, GVIGC-77XH has two sections without a separate 2 in its model number.

Section count also does not explain the joint arrangement. For storage and transport, check the manufacturer’s construction description and packed length as well as the number of sections.

Power Labels: Read Them Separately from Action and Lure Weight

Olympic publishes the following power terminology:

Code power name
XUL Extra Ultra Light
SUL Super Ultra Light
UL Ultra Light
L Light
LML Light / Medium Light
ML Medium Light
MLM Medium Light / Medium
M Medium
MMH Medium / Medium Heavy
MH Medium Heavy
H Heavy
X Extra
XH Extra Heavy
XX Double Extra

These are the names in Olympic’s power-reference list. Combined designations such as LML should retain their distinction from a simple L or ML rating. The list does not provide a numerical formula for converting each label into lure capacity.

Even two rods with the same power can have different lure ranges. In the SILVERADO range, 23GSILC-762ML is rated 3–18 g, while 23GSILS-762ML is rated 3–15 g. Both are ML, but the model-specific ratings remain separate.

For a comparison table, record power, action, lure rating, and line rating as separate fields. Do not derive one automatically from another.

Olympic’s Tip Designations Explained

Tip suffixes are particularly informative across the CORTO and CALAMARETTI families. They identify construction or a named tip design, but they do not describe the entire rod’s action.

Suffix Documented designation What it establishes
S Solid tip A solid-tip model. Carbon modulus requires separate confirmation.
HS Hard solid tip Olympic’s hard-solid design; its technical explanation identifies 30-ton carbon in the conventional hard-solid tip.
HS+ Hard Solid Tip Plus Olympic’s TORAYCA T1100G carbon solid-tip design.
TS Titanium solid tip A superelastic nickel–titanium alloy tip joined to a carbon tubular section.
GS Glass solid tip A fiberglass solid-tip construction.
T Tubular tip A hollow tip construction, explicitly identified on relevant product pages.

The S designation and an example of a specifically documented 24-ton solid appear in the CORTO Boat Ajing range. HS and HS+ are explained in Olympic’s solid-tip technical material; TS, GS, and T are documented in the corresponding technical and product descriptions.

S Does Not Supply a Universal Carbon Modulus

Olympic explicitly specifies a 24-ton solid tip for GCORBS-682ML-S. That is a verified material detail for this model—not a reason to label every rod ending in -S as using the same carbon.

Where the product page identifies only a solid tip, retain that description rather than adding a modulus that has not been documented.

HS and HS+: A Documented Material Distinction

Olympic’s development explanation compares the 30-ton carbon used in its conventional hard-solid tips with the T1100G material used in HS+, described there as 33-ton carbon. The company also discusses changes to fiber volume fraction and resin as part of the HS+ development.

The plus sign belongs to the tip designation. For example, 26GCORPS-582UL-HS+ is listed as UL power, not UL+. Its suffix identifies the HS+ tip; it does not increase the written power rating.

Official Olympic HS Plus solid-tip image showing the T1100G carbon tip section.

Olympic identifies HS+ as its T1100G hard-solid-tip design; the suffix describes the tip, not the rod's power. Source: Image: OLYMPIC Co., Ltd.

TS Identifies an Alloy Tip, Not a Fixed Diameter

Olympic’s titanium-solid technology uses a superelastic nickel–titanium alloy connected to a carbon tubular structure. This is a material and construction description, not a universal dimension specification.

Official Olympic titanium solid tip image showing the metallic tip section and guides.

Olympic's TS suffix identifies a superelastic nickel-titanium solid tip joined to the carbon tubular section. Source: Image: OLYMPIC Co., Ltd.

The 23GCORS-572UL-TS has a tip diameter of 0.6 mm, whereas 26GCORPS-592UL-TS is listed at 0.5 mm. Both use TS, but the dimensions must be checked individually.

GS: Glass Solid in the Metal-Sutte Range

The CALAMARETTI PROTOTYPE Metal Sutte lineup includes 26GCALPC-602MH/H-GS and 26GCALPC-632ML/M-GS. Olympic describes their fiberglass solid tips as emphasizing visible tip movement when detecting bites.

That is a documented design objective for these models. It does not establish a numerical sensitivity ranking against every carbon or titanium tip.

Tip Construction Does Not Determine One Fishing Style

A hard-solid tip is not automatically intended for heavier rigs. 23GCORUS-482UL-HS, for example, was developed around jigheads weighing less than 1 g.

Likewise, a tubular tip is not necessarily stiff or limited to an aggressive hook-setting style. 24GBELUS-582XUL-T has a Regular action, and Olympic describes its flexibility as helping accommodate short bites during steady retrieves of micro spoons and micro crankbaits.

Use the suffix to identify the tip, then read the action and application description to understand how that tip works within the complete rod.

Special Suffixes: Keep Them Attached to the Specific Model

The GCORS-572UL-TS LE is documented as a quantity-limited CORTO LIMITED model based on 23GCORS-572UL-TS. Olympic identifies revised guide settings and a special color scheme among its changes.

In this example, LE identifies the limited version. The verified product description is more useful than assuming that every special suffix across every historical series follows a shared rule.

When an additional suffix has no documented expansion in the source being used, preserve the full model number rather than inventing an English phrase for it.

Worked Examples: From Code to Confirmed Specification

24GTIRC-762MH — TIRO

A practical separation is:

24 / G / TIR / C – 76 / 2 / MH

This identifies a TIRO casting model with a nominal 7'6" length, two sections, and Medium Heavy power. Olympic publishes 2.29 m, Fast action, and a 9–38 g lure range, describing it as a more powerful versatile model based on 24GTIRC-752M.

The missing tip suffix should not be used as a substitute for an explicit construction description. The code supplies the model identifiers; the product page supplies the action and operating range.

26GCORPS-582UL-HS+ — CORTO PROTOTYPE

26 / G / COR / P / S – 58 / 2 / UL – HS+

The model is a 5'8", two-section, UL spinning rod in the CORTO PROTOTYPE range, equipped with the T1100G HS+ solid tip.

Its specifications include 1.73 m, Regular-Fast action, MAX 3 g lure weight, and MAX 2 lb line. These limits are individual specifications, not meanings contained in HS+.

[[JDMAS:olympic-corto-prototype-hsplus]]

26GBELPS-572XUL-S — BELLEZZA PROTOTYPE

26 / G / BEL / P / S – 57 / 2 / XUL – S

This is a 5'7", two-section, Extra Ultra Light spinning model with a solid tip. Olympic lists 1.70 m, Regular-Fast action, a 0.2–2.5 g lure range, and MAX 3 lb line.

The manufacturer describes applications including micro spoons and micro crankbaits. Its solid-tip construction is documented, but the suffix alone does not establish the tip’s carbon modulus.

[[JDMAS:olympic-bellezza-prototype-solid]]

23GCORUS-542UL-S and 23GCORUS-482UL-HS — CORTO UX

Both are two-section, UL spinning rods, but the specifications and development descriptions distinguish them:

Model Nominal length Tip action lure range
23GCORUS-542UL-S 5'4" Solid Regular-Fast 0–3 g
23GCORUS-482UL-HS 4'8" Hard solid Fast 0–1.8 g

Olympic describes both around close-range fishing with sub-1 g jigheads. The longer 542UL-S has a milder action intended to broaden its versatility relative to the shorter 482UL-HS. This is a documented comparison between the models, rather than a universal “S versus HS” rule.

GCMC-705M — COMPATTO

G / CM / C – 70 / 5 / M

Here, the code identifies a 7'0", five-section, Medium-power casting model. Olympic’s table lists 2.14 m, Regular action, a 49.5 cm packed length, and a MAX 30 g lure rating.

The five-section configuration is useful information, but the packed length remains a separate specification. It should not be calculated simply by dividing the overall length by five.

[[JDMAS:olympic-compatto-five-piece]]

[[JDMAS:olympic-brand-collection]]

Read the Identifier, Then Check the Details

Graphiteleader model numbers are useful because they often combine several recognizable identifiers in a compact form. Their value is greatest when each element is used for the information it actually provides.

Start with the complete series and model name. Identify the reel type, nominal length, power, and any documented tip suffix. Then confirm section count, joint arrangement, action, lure and line ratings, materials, and packed length from the product specifications.

The code narrows the identification. The specification sheet completes it.

Naming examples and specifications checked against Olympic’s official product pages and technical explanations on November 16, 2026. The examples cover selected product generations rather than a complete current lineup.

Key official references