JDM Angler Supply is now open — authentic JDM tackle, shipped worldwide.

Country/Region / Language

  • Worldwide Shipping

  • Extensive Product Selection

  • Authentic JDM Tackle

  • Expert Tackle Support

DESIGNO Rod Model Numbers Explained

Decode DESIGNO rod codes by series, reel type, length, split power, RST or RX construction, and s response rating.

Official DESIGNO LEBEN Torque Tune M/sura casting rods with cork and EVA grips on a white background.

DLT-C611M/HRST1s becomes much easier to understand when you separate M/H, RST, and 1s. Those groups describe different things: a split power setting, solid-tip construction, and DESIGNO’s firmness-and-response designation. The model is known as M/sura, or Emusura, in the manufacturer’s product descriptions.

This guide explains the naming patterns through manufacturer-documented LEBEN Torque Tune, LEBEN Overlay, SLANG Reboot, and Wraith models. Start with the series and reel type, then read the length, power, tip construction, and s suffix as separate fields.

Featured image source: Image: DESIGNO

Series Prefixes: DLT, DLO, LSR, and LW

The letters before the first hyphen identify the product family.

Prefix Series Example
DLT LEBEN Torque Tune DLT-C610MHRST4s
DLO LEBEN Overlay DLO-C65MHRST5s
LSR SLANG Reboot LSR-C74XHRST2s
LW Wraith LW-C70MH-RST4s

These pairings follow Prime’s official DESIGNO listings. They identify separate product families rather than four levels on a single performance scale.

What the Series Tells You—and What It Does Not

DESIGNO describes Wraith as exploring the overlap between LEBEN’s technical control and SLANG’s power-oriented, big-bait and bank-fishing designs. The prefix identifies that design direction; it does not specify one universal guide train, reel seat, or lure range.

Even within a series, components can vary. DLO-C67M+RST3s uses larger guide sizes than other Overlay models to accommodate pitching and other low-speed casts. Its equipment is part of the individual model’s design, not something that can be completely reconstructed from DLO alone.

Reel Type and Length

C Identifies Casting; SJ Identifies the Spinning Models Shown Here

After the series prefix, C identifies a casting model, while SJ appears on the spinning models in this guide. For example, DLT-C611M/HRST1s is a casting model, and DLT-SJ611M/HRST2s is the corresponding power-spinning concept. In these names, SJ identifies the spinning configuration; the tip specification appears later in the code.

Read the Numbers as Feet Followed by Inches

Length block Read it as Manufacturer-listed example
64 6'4" DLT-SJ64UL/MRST2s
65 6'5" DLO-C65MHRST5s
67 6'7" DLO-C67M+RST3s
610 6'10" DLT-C610MHRST4s
611 6'11" DLT-C611M/HRST1s
70 7'0" LW-C70MH-RST4s
74 7'4" LSR-C74XHRST2s

These examples use the length block between the reel-type code and the power letters. 610 means 6 feet 10 inches, not 6.10 feet and not a section count.

A longer rod can share much of another model’s coding without being the same configuration. DESIGNO’s LSR-C75M/HRST1s M/sura is a 7'5" SLANG Reboot model with a 320 mm rear grip and larger guides than the LEBEN version. Its lure range is 1/8–3 oz. Those differences sit alongside the shared M/H, RST, and 1s designations.

[[JDMAS:designo-slang-reboot-msura]]

Power: Read the Slash and the Modifier with the Power Letters

Power labels such as UL, ML, M, MH, H, and XH describe Ultra Light, Medium Light, Medium, Medium Heavy, Heavy, and Extra Heavy classes. DESIGNO also uses split-power settings and plus or minus modifiers. The key is to identify the complete power group before moving on to the tip code.

UL/M and M/H: Different Power at the Tip and Butt

DLT-SJ64UL/MRST2s separates as:

DLT / SJ / 64 / UL/M / RST / 2s

The manufacturer explicitly describes an Ultra Light tip paired with a Medium-power butt. UL/M is the power distribution; RST identifies the solid-tip specification, and 2s is a separate response designation.

Similarly, DLT-SJ611M/HRST2s combines a solid tip with an H-power butt for power-finesse spinning presentations. DESIGNO describes a short, multi-taper solid section intended to retain precise casting and lure control.

The slash does not, by itself, define a manufacturing method. DLT-C610MHRST4s also uses DESIGNO’s multi-taper solid-tip construction, despite having a single MH power label rather than a split rating.

M+ and MH−: Keep the Modifier Attached

On DLO-C67M+RST3s, the power designation is M+. DESIGNO describes it as a power-bait-finesse model for lighter Texas rigs, direct rigs, free rigs, and heavy drop-shot presentations. Its lure range is 3–14 g.

On LW-C70MH-RST4s foxy, the hyphen after MH is a minus sign. The manufacturer explicitly writes the specification as MH− and describes a slightly more accommodating tip combined with a thicker-walled tubular section than the DLT-C610MHRST4s design on which it is based.

For these modifiers, retain the exact label and read the model’s explanation. A plus or minus is not a measured fraction of stiffness, and it does not replace the lure range.

Close official view of the DESIGNO Wraith foxy blank and its LW-C70MH-RST4s model marking.

The printed foxy model name keeps MH−, RST, and 4s together while each field describes a different part of the configuration. Source: Image: DESIGNO

RST and RX: Distinguish Tip Construction from Power

RST: Solid-Tip Models

The RST examples in this guide use solid-tip construction. DESIGNO identifies its multi-taper solid on both DLT-C610MHRST4s and DLO-C67M+RST3s. The latter’s description also explains how the tip and belly were adjusted for lighter rigs.

The important parsing distinction is:

Model Power group Tip code Response designation
DLT-C611M/HRST1s M/H RST 1s
DLT-C610MHRST4s MH RST 4s
DLO-C65MHRST5s MH RST 5s

HRST is not a separate tip category in these examples. The H belongs to M/H or MH; RST follows it. Separate the power group before reading the tip specification.

RX: A Tubular Example

DLT-C67H-RX4s is described by DESIGNO as a tubular model developed around responsive, weightless soft-jerkbait work. Its H− power and 4s response designation are separate from RX.

The distinction is useful when comparing two 4s rods: an RST model and an RX model can have different tip structures even though they share the same s value.

The practical distinction is the construction identified by the manufacturer: a solid-tip design on the RST models discussed here, versus a tubular design on this RX model.

Official DESIGNO DLT-C67H-minus-RX4s casting rod shown with cork and EVA grips.

The DLT-C67H−RX4s uses RX in a model DESIGNO describes as tubular, separate from its H− power and 4s response designation. Source: Image: DESIGNO

What DESIGNO’s s Designation Tells You

DESIGNO uses 1s, 2s, 4s, and other s values when discussing a rod’s firmness and speed of response. In its explanation of DLT-C610MHRST4s, the manufacturer says it deliberately stopped short of 5s-level firmness to preserve versatility. That supports reading the value as a tuning reference—not as a lure-weight class.

Keep power, tip construction, and s value separate. A lower s number does not necessarily mean a weaker rod, and 4s is not a recovery time of four seconds or a carbon-modulus measurement.

Three Examples Show How the Tuning Is Used

Model s value Manufacturer-described design direction
DLT-SJ67L/MLRST0s 0s Tip movement for midwater jighead swimming and rolling presentations
DLT-C611M/HRST1s 1s Versatile use, including moving baits and soft-plastic presentations
DLT-C610MHRST4s 4s More responsive lure control while retaining a broad range of applications

These are model-specific descriptions, not a universal chart assigning one technique to every rod with the same s value.

Why a 0s Rod Can Still Have a Strong Blank

For DLT-SJ67L/MLRST0s, DESIGNO deliberately uses a stronger blank rather than softening the whole rod. The solid tip and guide layout help generate the intended shaking movement: stainless-frame KB guides are placed near the tip, with lighter titanium frames through the belly and butt.

The stated purpose is to produce controlled tip movement across different lure weights. Its 0.9–18 g lure range further shows why 0s should not be interpreted as an Ultra Light power rating.

Response Is Not Simply Carbon Modulus

On DLT-C67H-RX4s, DESIGNO describes an unpainted, polished finish as increasing the sense of firmness without changing the carbon material. Its response therefore reflects the finished design, not a carbon-grade number hidden in the s suffix.

Use s to understand the manufacturer’s intended feel, then compare the actual lure range, tip structure, and application notes.

Six Complete Model Numbers, Decoded

LEBEN Torque Tune DLT-C611M/HRST1s — M/sura

DLT / C / 611 / M/H / RST / 1s

LEBEN Torque Tune, casting, 6'11", split M/H power, solid tip, 1s. The ratings are 2–60 g lures and 10–20 lb line. DESIGNO presents it as a versatile model spanning finesse rigs, moving baits, and larger lures.

LEBEN Torque Tune DLT-SJ64UL/MRST2s

DLT / SJ / 64 / UL/M / RST / 2s

LEBEN Torque Tune, spinning, 6'4", UL tip/M butt, solid tip, 2s. The manufacturer lists 0.5–10 g lures, 3–7 lb line, and PE #1.2 maximum. The split power is central to its combination of finesse control and butt strength.

LEBEN Overlay DLO-C65MHRST5s

DLO / C / 65 / MH / RST / 5s

LEBEN Overlay, casting, 6'5", Medium Heavy, the RST solid-tip designation, and 5s. Here, MH is the power group and RST follows it. The final 5s is separate from both the length and the power rating.

LEBEN Torque Tune DLT-C67H-RX4s

DLT / C / 67 / H− / RX / 4s

LEBEN Torque Tune, casting, 6'7", Heavy Minus, tubular construction, 4s. DESIGNO explicitly identifies the minus sign in the product title. It describes a short, responsive model for weightless soft-jerkbait work and also lists football jigs, Texas rigs, spinnerbaits, and bladed jigs among its applications.

Wraith LW-C70MH-RST4s — foxy

LW / C / 70 / MH− / RST / 4s

Wraith, casting, 7'0", Medium Heavy Minus, solid tip, 4s. Its rating is 1/8–2.2 oz, with 20 lb maximum line. The MH− label is part of the power specification, not merely a separator before RST.

[[JDMAS:designo-wraith-foxy]]

SLANG Reboot LSR-C74XHRST2s — HANG OUT mid

LSR / C / 74 / XH / RST / 2s

SLANG Reboot, casting, 7'4", Extra Heavy, solid-tip specification, 2s. The ratings are 1/4–4 oz lures and 25 lb maximum line. DESIGNO specifies a straight guide arrangement and describes applications including big baits, swimbaits, and jigs.

This example also keeps two separate ideas visible: a powerful XH rod can use a solid tip, and its 2s value does not make it a light-power model.

Close official view of the DESIGNO SLANG Reboot HANG OUT mid blank and LSR-C74XHRST2s marking.

The HANG OUT mid blank marking shows the complete LSR-C74XHRST2s code used in the decoded example. Source: Image: DESIGNO

[[JDMAS:designo-slang-reboot-hang-out-mid]]

[[JDMAS:designo-brand-collection]]

Use the Specifications to Complete the Picture

The model code organizes the configuration. Components and numerical limits supply the details that remain outside it.

For example, DLT-SJ611M/HRST2s lists a DRSS16 reel seat, 205 mm rear grip, 0.9–21 g lure range, and maximum PE #2. Those values belong to that model; they cannot be derived from SJ, M/H, or 2s alone.

When comparing listings, keep the series prefix, complete power group, tip code, s value, and grip version together. Cork and EVA versions appear in the manufacturer’s listings, while M/sura is used for both a LEBEN Torque Tune model and a different SLANG Reboot configuration. The nickname alone is not enough to identify the rod.

Start with the presentation and lure weights you intend to fish. Use the code to narrow the configuration, then compare the line range, construction, grip dimensions, and model-specific application notes.

Read power, tip construction, and response as separate choices. That is the most useful way to turn DESIGNO’s long model names into a practical comparison.

Key official references