On this page
ARES is Uzaki Nissin's lure-rod brand, with ranges for eging, ajing, shore jigging, rockfish, and offshore fishing. Its names combine product families, fishing applications, and individual model designations.

ARES is UZAKI NISSIN's lure-rod brand. Source: Image: UZAKI NISSIN / ARES
The key is to read the full name before interpreting individual letters. A code such as 504S and a listing such as M(S) 7.0 use different formats. This guide explains the naming patterns found in ARES lure rods through examples from BLUE PORTER and LESTER.
ARES Fishing Application Codes
Within the BLUE PORTER family, letter groups distinguish ranges developed for particular fishing applications. These associations help identify the type of rod before you compare individual models.
| Code | Fishing application or model category |
|---|---|
AJ |
Ajing: Japanese light-tackle fishing for aji, or Japanese horse mackerel |
EG |
Eging: squid fishing with a prawn-shaped egi lure |
TR |
Tip-run eging: boat-based eging with a weighted egi worked below a drifting boat |
NK |
Omorigu: a Japanese boat-squid method using a separate sinker and egi |
NKS |
Short model for the same omorigu boat-squid method |
SB |
Sea bass fishing |
SHJ |
Shore jigging |
HR |
Rockfish fishing |
JG |
Offshore jigging |
IKM |
Ika metal: boat-squid fishing with a metal-sutte lure |
TAR |
Tai-raba (tai-rubber): boat fishing for red sea bream with a skirted sliding-head lure |
BLUE PORTER NKS illustrates how a related name identifies a different model format. Its M(S) and MH(S) versions are listed at 5'8" / 1.72 m, while the standard BLUE PORTER NK models are 7'0" / 2.13 m.
Reading the Length
Three Digit Feet and Inches
In the BLUE PORTER X4 AJ range, the first digit gives the number of feet and the following two digits give the inches:
| Designation | Length in feet and inches | Listed metric length |
|---|---|---|
504S |
5'4" | 1.62 m |
509S |
5'9" | 1.75 m |
603S |
6'3" | 1.90 m |
606S |
6'6" | 1.98 m |
All four models are listed with two sections. The metric figures above reproduce ARES' listed measurements.

BLUE PORTER X4 AJ uses a three-digit feet-and-inches model code and a final S for its solid tip. Source: Image: UZAKI NISSIN / ARES
[[JDMAS:nissin-ares-x4-aj-504s]]
A Dot Can Separate Feet and Inches
The BLUE PORTER EG range uses designations such as 8.6. In that product family, 8.6 corresponds to 8 feet 6 inches, with a listed overall length of 2.59 m.
Write that length as 8'6" or 8 ft 6 in when describing it in English. The model notation should not be converted as the decimal quantity 8.6 feet.
Understanding S, B, and T
Letters can refer to different specifications depending on their position and the rod family.
The models ending in S in BLUE PORTER X4 AJ have solid tips. In BLUE PORTER NK, (S) denotes the spinning version and (B) the baitcasting version. Both NK versions have carbon solid tips.
| Complete example | What the relevant letter identifies |
|---|---|
BLUE PORTER X4 AJ 504S
|
A model with a solid carbon tip |
BLUE PORTER NK M(S) 7.0
|
The spinning version |
BLUE PORTER NK M(B) 7.0
|
The baitcasting version |
LESTER Yumeshizuku GVX 710T
|
A tubular model |
LESTER Yumeshizuku GVX 710T is a tubular light-game model measuring 7'10" / 2.39 m. Its listed lure rating is 0.5–8 g. Here, 710 gives the length and T corresponds to tubular construction.
For BLUE PORTER NK, choosing (S) or (B) is a choice of reel format. Read tip construction separately, using the specification for that model.

On BLUE PORTER NK, S and B in parentheses distinguish spinning and baitcasting versions; both use carbon solid tips. Source: Image: UZAKI NISSIN / ARES
[[JDMAS:nissin-ares-nk-700m-spinning]]
Understanding Power Labels and Load Ratings
Power labels such as L, ML, M, and MH distinguish versions within a product range. Their practical meaning comes from the compatible tackle listed for that series.
The relevant measurement changes with the fishing technique:
| Model | Rating category | Listed range |
|---|---|---|
| BLUE PORTER EG ML 8.6 | Egi size | 2.5–4.0 on the nominal Japanese egi-size scale |
| BLUE PORTER EG M 8.6 | Egi size | 2.5–4.0 on the nominal Japanese egi-size scale |
| BLUE PORTER NK M(S) 7.0 | Sinker load | 10–35 go (about 37.5–131 g) |
| BLUE PORTER NK MH(S) 7.0 | Sinker load | 15–50 go (about 56–188 g) |
The ML and M EG examples share the same listed egi range. A different power label therefore does not always produce a different listed lure-size range.
Keep egi size, sinker load, lure weight, and line rating in separate categories. The Japanese unit go is context-dependent: egi numbers are nominal lure sizes, while sinker load uses a weight scale in which 1 go is approximately 3.75 g.
Construction Labels in the Name
Some parts of an ARES product name identify blank construction. Two useful examples are X4 and GVX.
X4 and Four Axis Carbon
In BLUE PORTER X4 AJ, ARES specifies ultra-thin, high-density four-axis carbon throughout the blank excluding the solid tip. The tip itself is listed as a high-modulus solid tip.
X4 identifies the carbon construction. Check the separate 継数 column for the number of rod sections.
GVX as a Construction Name
On the LESTER Yumeshizuku GVX page, ARES names its GVX construction method Granroll Various X. In the full model name, GVX identifies that construction method, while 710T identifies the 7'10" tubular model.

LESTER Yumeshizuku GVX 710T pairs the GVX construction name with a 7-foot-10-inch tubular model code. Source: Image: UZAKI NISSIN / ARES
[[JDMAS:nissin-ares-gvx-710t]]
Reading an ARES Specification Table
ARES product pages list measurements and tackle ratings separately from the short model code. These headings are useful when checking a Japanese listing. The original labels are reproduced so readers can match them directly to the manufacturer's table, with an English translation beside each one:
| Japanese label | English meaning |
|---|---|
| 品番 (hinban) | Model designation |
| 全長 (zencho) | Assembled length |
| 継数 (tsugisu) | Number of sections |
| 仕舞寸法 (shimai sunpo) | Packed length |
| 自重 (jiju) | Rod weight |
| 錘負荷 (omori fuka) | Sinker load |
| 商品コード (shohin code) | Product code |
| JANコード (JAN code) | JAN barcode number |
The model designation, product code, and JAN barcode are separate fields in the product table.
For transport, use the packed length rather than estimating it from overall length. For example, BLUE PORTER NKS M(S) 5.8 is listed as a two-section rod with a packed length of 90 cm.
A Practical Reading Order
- Identify the family and fishing application. Read the complete series name before interpreting the shorter model code.
- Read the length in that family's format. Distinguish compact numeric codes from notation that separates feet and inches with a dot.
- Separate reel type from tip construction. Determine what each letter identifies in that particular range.
- Confirm the load and line ratings. Match your tackle to the actual lure, egi, sinker, and line specifications.
- Check transport and construction details. Read the section count, packed length, materials, and hardware specifications.
This reading order makes the model name useful as a starting point and keeps the final comparison tied to the specifications of the actual rod.
[[JDMAS:nissin-rods-collection]]